Reverse Osmosis System Bottled Pure Mineral Water Treatment for SUS304
China Reverse Osmosis System Bottled Pure Mineral Water Treatment for SUS304, Find details about China Water Treatment System, Reverse Osomosis from Reverse Osmosis System Bottled Pure Mineral Water Treatment for SUS304
Basic Info.
Model NO.
1-20ton
Trademark
tango
Specification
RO 1Ton 2ton 3ton 4ton 5ton
Origin
Zhangjiagang
HS Code
8422301090
Model NO.
1-20ton
Trademark
tango
Specification
RO 1Ton 2ton 3ton 4ton 5ton
Origin
Zhangjiagang
HS Code
8422301090
Product Desciption
Reverse osmosis system bottled pure mineral water treatment for sus304
Silica sand filter
Technical Parameter:
Operating Temperature 5- - 40(Special temperature can be customized. )
Operating filtration speed (m/h) 5- - 12m/h Max. 15 m/h
Material, tank material: 304L
Operating pressure (M-PA) 0.05- - 0.6MPa/cm2
Filtration flux (m3/h) Unit flux: 0.5 m3/h- - 80m3/h
Simply introduction:
Silica sand filter inside fill media is: Silica sand.
Characteristic: Water get through filter inside fill stuff, filter remove water inside suspended material, organic material, colloidal particles, Microorganisms, chloride ion and off-flavor particle.
Activated carbonate filter
Active filter is mainly used to remove organic material, Chromaticity and over chlorine in water treatment system. Filled with different performance active carbon, it can arrive at different processing intent. When it is used as pretreatment system for ion exchange, it can assure useful life for ion exchange resins, improve water quality, and prevent from polluting for resin.
Sodium iron exchanger
Sodium iron exchanger is used for reduce the rigidity of the water, the raw water is softening by exchanger from the top down.
The water is contain Magnesium, calcium, positive ion and sodium of water exchanger, they are exchanged each other. Raw water is softening to the water contained minute Magnesium, calcium and salt. It can be used for water supply for boilers and some industrial water. The sodium has large solubility in water, so it will not be hard scale inner of boilers, it can be cleaned out easily. The water through sodium exchanger need to be dealt with clarification filtration, there is not suspended material basically.
Ultraviolet sterilizer
Length: 1500mm; Height: 1000mm; Width: 400mm; Working pressure: 220V+10%
Usage:
UV exposure to liquid or air, instantaneous destruction of a variety of bacteria, viruses and other microbial cells and tissues in the DNA, RNA, when a virus or bacteria in this band irradiation, absorbed doses of more than 6000-10000U. W. Sec/cm2, their life central DNA (deoxyribonucleic acid) has been destroyed so that it immediately to die or lose the ability to reproduce
We also provide filling machine
Usage:
The filling machinery/ filling equipment/ filling device/ filler/liquid packing machine is mainly used for washing, filling sealing carbon dioxide drink such as soda water and so on.
Characteristics:
The water filling machine adopts hanging type conveying bottle structure to make changing bottle model more convenient, faster and more east.
The filling machinery/ filling equipment/ filling device/ filler/liquid packing machine adopts advanced PLC control technology. The key electric elements adopt international famous products.
Main performance
1) bottle is entered by air conveyor, the speed of bottle entering is fast and bottle shape isn't changed because of adopting hanging clamping bottle neck way.
2) adopting clamping bottleneck way to wash bottle mouth and avoid touching screw mouth, adopting clamping bottleneck way in the whole conveying process. When bottle type changes, you need to change the board related with bottle diameter.
3) filling adopts cylinder feeding structure, filling valve adopts high filling speed and mass flow rate valve which control liquids level accurately and without loss.
4) screw capper adopts French advanced technology which can screw cap promptly when clamping bottle.
5) the PLC and transducer are chosen from international famous brand, such as omron, mitsubishi and so on.
After sale service
1. Welcome to consult us for offer and technical solution:
2. free design workshop layout as workshop space.
3. free check raw material quality report to match suit water treatment system.
4. Engineer install and train client how to use and maintain machine
5. one year guarantee
6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.
Some basic details need buyer support:
1. bottle and cap samples
2. workshop space length and width size
3. source water quality report
4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph
5. and other details need check
6. for more,can talk us 86-13739169728
We also supply Raw material required for filling line required:
preform&cap &label&PE film
After sale service
1. Welcome to consult us for offer and technical solution:
2. free design workshop layout as workshop space.
3. free check raw material quality report to match suit water treatment system.
4. Engineer install and train client how to use and maintain machine
5. one year guarantee
6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.
Some basic details need buyer support:
1. bottle and cap samples
2. workshop space length and width size
3. source water quality report
4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph
5. and other details need check
6. for more,can talk us 86-13739169728
We also supply Raw material required for filling line required:
preform&cap &label&PE film
Silica sand filter
Technical Parameter:
Operating Temperature 5- - 40(Special temperature can be customized. )
Operating filtration speed (m/h) 5- - 12m/h Max. 15 m/h
Material, tank material: 304L
Operating pressure (M-PA) 0.05- - 0.6MPa/cm2
Filtration flux (m3/h) Unit flux: 0.5 m3/h- - 80m3/h
Simply introduction:
Silica sand filter inside fill media is: Silica sand.
Characteristic: Water get through filter inside fill stuff, filter remove water inside suspended material, organic material, colloidal particles, Microorganisms, chloride ion and off-flavor particle.
Activated carbonate filter
Active filter is mainly used to remove organic material, Chromaticity and over chlorine in water treatment system. Filled with different performance active carbon, it can arrive at different processing intent. When it is used as pretreatment system for ion exchange, it can assure useful life for ion exchange resins, improve water quality, and prevent from polluting for resin.
Sodium iron exchanger
Sodium iron exchanger is used for reduce the rigidity of the water, the raw water is softening by exchanger from the top down.
The water is contain Magnesium, calcium, positive ion and sodium of water exchanger, they are exchanged each other. Raw water is softening to the water contained minute Magnesium, calcium and salt. It can be used for water supply for boilers and some industrial water. The sodium has large solubility in water, so it will not be hard scale inner of boilers, it can be cleaned out easily. The water through sodium exchanger need to be dealt with clarification filtration, there is not suspended material basically.
Ultraviolet sterilizer
Length: 1500mm; Height: 1000mm; Width: 400mm; Working pressure: 220V+10%
Usage:
UV exposure to liquid or air, instantaneous destruction of a variety of bacteria, viruses and other microbial cells and tissues in the DNA, RNA, when a virus or bacteria in this band irradiation, absorbed doses of more than 6000-10000U. W. Sec/cm2, their life central DNA (deoxyribonucleic acid) has been destroyed so that it immediately to die or lose the ability to reproduce
|
| Name | Country | Brand |
| Water pump | China | Nanfang pump |
| Main motor | Swiss | ABB |
| PLC | Japan | Mitsubishi |
| Frequency convertor | Japan | Mitsubishi |
| Touch screen | Taiwan | WEIVEW |
| Photocel switch | Japan | Omron |
| Approach switch | Japan | Omron |
| Sensor | France | Schneider |
| Contactor | France | Schneider |
| Liquid controller | Japan | Omron |
| Pneumatic component | Taiwan | Airtac |
| Stainless steel | 304 2B | |
| Working table board tickness | 22mm | |
| U-Bar | 150*60 model,. 5mm wall thickness square pipe | |
| Table hole | CNC boring | |
| shaft | 3A | |
| Filling valve | Number controlling maching | |
| Filling tank | With sealing design | |
| Liquid sealing head | Wuxi beihai sealer | |
| Filling solid | Casting parts | |
| Filling liquid support | Drop type | |
| Capping head | Computer controlling, thermo treatment, special steel | |
| Capping fix | 1pcs, full stainless steel | |
| Capping total form | Demote and promote type | |
| Main shaft leak-proof design | have | |
We also provide filling machine
Usage:
The filling machinery/ filling equipment/ filling device/ filler/liquid packing machine is mainly used for washing, filling sealing carbon dioxide drink such as soda water and so on.
Characteristics:
The water filling machine adopts hanging type conveying bottle structure to make changing bottle model more convenient, faster and more east.
The filling machinery/ filling equipment/ filling device/ filler/liquid packing machine adopts advanced PLC control technology. The key electric elements adopt international famous products.
Main performance
1) bottle is entered by air conveyor, the speed of bottle entering is fast and bottle shape isn't changed because of adopting hanging clamping bottle neck way.
2) adopting clamping bottleneck way to wash bottle mouth and avoid touching screw mouth, adopting clamping bottleneck way in the whole conveying process. When bottle type changes, you need to change the board related with bottle diameter.
3) filling adopts cylinder feeding structure, filling valve adopts high filling speed and mass flow rate valve which control liquids level accurately and without loss.
4) screw capper adopts French advanced technology which can screw cap promptly when clamping bottle.
5) the PLC and transducer are chosen from international famous brand, such as omron, mitsubishi and so on.
| Model: | DCGF16/12/6 | DCGF16/16/6 | DCGF18/18/6 | DCGF24/24/8 | DCGF32/32/10 | |||
| Production(500/m/bottle/h): | 3000 | 5000 | 8000 | 10000 | 12000-14000 | |||
| washing filling and capping heads | 16 12 6 | 16 16 6 | 18 18 6 | 24 24 8 | ||||
| Bottle size | Circular or square bottleBottle diameter(mm): Φ50-φ90 Bottle height(mm): 150-310 | |||||||
| Compressed air pressure(MPa): | 0.3-0.7 | |||||||
| Washing medium: | Aseptic water Washing | |||||||
| water's pressure(MPa): | 0.25 | |||||||
| Total output (KW): | 3.13 | 3.84 | 3.84 | 4.1 | 5.6 | |||
| Oerall dimensions(mm): | 2500x1500x2500 | 2500x1800x2500 | 3200x2200x2800 | 3400x2600x2800 | 3600x2800x3000 | |||
| Weight (kg): | 2500 | 3000 | 3500 | 4500 | 5000 | |||
After sale service
1. Welcome to consult us for offer and technical solution:
2. free design workshop layout as workshop space.
3. free check raw material quality report to match suit water treatment system.
4. Engineer install and train client how to use and maintain machine
5. one year guarantee
6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.
Some basic details need buyer support:
1. bottle and cap samples
2. workshop space length and width size
3. source water quality report
4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph
5. and other details need check
6. for more,can talk us 86-13739169728
We also supply Raw material required for filling line required:
preform&cap &label&PE film
After sale service
1. Welcome to consult us for offer and technical solution:
2. free design workshop layout as workshop space.
3. free check raw material quality report to match suit water treatment system.
4. Engineer install and train client how to use and maintain machine
5. one year guarantee
6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.
Some basic details need buyer support:
1. bottle and cap samples
2. workshop space length and width size
3. source water quality report
4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph
5. and other details need check
6. for more,can talk us 86-13739169728
We also supply Raw material required for filling line required:
preform&cap &label&PE film
You Might Also Like
Direct Supply High Quality Yk11 Great Strength Sarms Powder ......
Sharpy 330W Moving Head Beam 15r
( TPU ) Lubrizol Estane 5701/5707/5713/5714 Thermoplastic Po......
Second Hand Used Zx65 Cheap Good Mini Excavator Ex60 Hydraul......
2021 Cheap Plush Toy Pendant Custom Soft Keychain Plush Toy ......
Plastic Tarp Polyethylene UV Resistance Waterproof Truck Cov......
Optical Brightener CBS-X for Detergent
Merchant Wire -Black Annealed Wire for Building Construction
2021 New Face Brush Private Label Waterproof Pore Cleaner Mi......
D-SUB Mini Dsub PCB Electronic Computer Connector ( dB15F +1......