Basic Info.

Model NO.

snbaier

HS Code

3214109000

Model NO.

snbaier

HS Code

3214109000

Product Desciption

we are a leading professional gypsum board manufacturer in china,we can provide all  kinds of gypsum board as following:Standard gypsum board, Moisture-resistant gypsum board, Fire-proof gypsum board, Water-proof gypsum board ,PVC gypsum ceiling tile, Mineral fiber-board T-grids ,light keel steel ,self-tapping screw, paper joint tape, jointing compound and some other auxiliary material .

Wall putty ready to use multi-purpose joint compound

4)Store:
a. Store environment: should keep dry and store time <6 month
 1) Application: it is a kind of decorative material for the surface of the wall.
 
2) Material:
Talcum powder 60%     pulverized lime 15%   lignocellulose 3% gypsum powder 2% white cement 5%  water 10% glue 2% additive 3%  
 
3)Method of application :
a. Usage Amount: 1-1.5kg/M2    
b. Wall face should smooth and clean, wall moisture content <5%
c. If need paint two time should wait first time dry then go on.
d. Construction temperature should >5°C, Dry temperature should >0°C
e. After use it remain should save seal

5) Advantage: use directly to brush the wall,  very easy and convenient to operation, no dust caused, and environment friendly!

2.The comparison of Putty Powder & ready mixed joint compound (Putty Paste)
Putty powder is "powder", putty paste is "paste paint".
First of all, we all know that putty is a every common kind of building decoration material. Every rough house should do the work of shaving putty. This can make the original grass-roots wall more smooth, so it will make it easier to  paint or to lay the base of wallpaper work.

Usually putty is gypsum or cement based, so its surface will be rough. When it is applied to the base, it has greater adhesion and is easier to adhere firmly. But in construction, it is necessary to paint a layer of interface agent at the base, so that it can help the adhesion of the wall. The two-way adhesion is guaranteed to allow the putty to stick to the surface of the base.

The putty paste is a kind of decorative material on the surface of the wall, and it is a kind of paste paint. In simple terms, it is a kind of paste - like finished putty. It can be directly applied to the place where the depressions need to be mended, and very few conditions are limited.

Advantages of the Putty Powder & Putty Paste
Advantages of powder:
1) The putty powder is more environmentally friendly. A qualified putty powder does not add extra auxiliary materials, nor does it contain any formaldehyde.
2) The price is cheap. No matter how much attention is paid to putty powder in production, transportation or storage, so the cost is naturally low, and the market price will not be very high.
3) The shelf life is long. Putty powder is a dry powder. As long as it does not suffer from moisture, the shelf life of the putty can be almost 12 months.
The advantages of putty paste:
1) Because it is the finished putty, the operation is very convenient.
2) The quality is fine. The production of putty paste should be fully stirred after 4 hours, more delicate, and the construction effect is better.
3) Reduce dust pollution. The putty paste can be directly constructed, and it does not need to be stirred in the construction site. It can effectively reduce the pollution of dust.
The shortcomings of both:
The main shortcoming of putty powder is the problem of operation. When the putty powder is used, it needs the operation of adding water in the later period, and it will be more rough. If the craftsmanship of the construction master does not pass through, there may be some problems.
And the shortcoming of putty paste is the price is expensive, the shelf life is short, and it is not easy to store.






FAQ:
1.What products you mainly have ?  
Our products contains standard plasterboard, fire-proof plasterboard, moisture-proof plasterboard, PVC gypsum ceiling tile, mineral fiber board ,T-grids ,light keel steel ,self tapping screw, paper joint tape, jointing compound and some other auxiliary material which might interest you.

2.Are you a factory ?  
Yes, We are a factory in Wanzhuang Industrial Park, Pingyi, Linyi, Shandong, China

3.Are your products reliable?
We treat the quality formostly , quality is a essential part for a company , we are now and will always persuit the most trustable quality products.In view of this ,we have a ASTM system and  ISO 9001:2008, ISO14001:2006,etc. 

4.As far as I know , you factories are always late than the appointed time, how can you guanrante the on-time delivery ?
When you placing the order , the rest matter has been passed to us , and we will keep in touch with our factory and reply you with the most up-to date information to you.  

5.What is the payment you have? 
L/C and TT are the usual payment we use , when placing the big order ,  a balanced  flexible payment will be taken .

Our Advantage:

1.Our Professional Manufacturer let us supply large amount high quality products with competitive price
2.Our High-Quality Team let our customer can get better service from us
3.We can provide a competitive After-sales service

Our Service:
1.Trust us from heart cooperation
2.Reasonable price 
3.Unique quality
4.Schedule delivery on time
5.Updated technology and equipment
6.Service warmly 

 

Because professional,so rest assured! 
 
24hours on line or email /phone service.
Feel free to contact me if you would like to know more details, I will  reply to you as soon as possible , thanks a lot !    

Welcome to visit our factory  !!!