Products

NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor

China NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor, Find details about China Stepper Motor, Stepper DC Motor from NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor

Transport Package
Carton/Case
Transport Package
Carton/Case
Nema 23 2Nm 4.2A Motor With Encoder Closed Loop Stepper Motor 

NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper MotorNEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor

 Features:
1.Can drive 57mm,60mm,86mm flange step close loop motor


2.Voltage input range: 24~60 VDC


3.Range details: 200~51200ppr


4.Singnal input: Differential/single end, pluse/direction,signal level 5V-24V Compatible.


5.Frequency of pluse response: 200KHz


6.Close loop vector control,promise motor in high speed and large torque output,in the main time,keep the motor not lost step.


7.Change current control,automatically output current acording to load and speed,motor heating lower and Ultra-low vibration noise have functions of overload, overcurrent protect and follow errors.

Stepper Motor Driver Data Sheet
referenceHBS57
mintypicalmaxunit
Max current--6A
Voltage Input183660VDC
Logical Current Input71016MA
Pluse Frequency-200-KHZ
Insulation resistance500  MΩ


Motor and power input port.
Port No.symbolNameinstruction
1A+A phase motor windingIf the initial direction of the motor is opposite, set W5
2    A-A phase motor winding-If the initial direction of the motor is opposite, set W5
3    B+B phase motor winding+If the initial direction of the motor is opposite, set W5
4    B-B phase motor winding-If the initial direction of the motor is opposite, set W5  
5   VDCInput AC power18V~ 60VDC
6   GND   Power NegtivePower Negtive
    

 
Other models of Stepper Motors
ModelStep AngleTorqueCurrentVoltageResistanceInductanceMotor LengthIncrementShaftShaft DIAWeight
   NM   A   V    Ω    mH  mmEncoderlength   mm  kg
         mm  
           
86EBP111ALC1.8 624-1100.422.41051000PPR34144
86EBP147ALC1.88.5624-1100.524.161431000PPR34144.5
86EBP159ALC1.810624-1100.77.31541000PPR34145.5
86EBP181ALC1.812624-1100.697.21761000PPR34146.5
 
ModelStep AngleTorqueCurrentVoltageResistanceInductanceMotor LengthIncrementShaftShaft DIAWeight
  °  NM   A   V    Ω    mH  mmEncoderlength   mm  kg
         mm  
           
86EBP111ALC1.85624-1100.422.41051000PPR34142.6
86EBP147ALC1.88.5624-1100.524.161431000PPR34144.2
86EBP159ALC1.810624-1100.77.31541000PPR34144.7
86EBP181ALC1.812624-1100.697.21761000PPR34145.5
Driver Specification:
Brief Introduction:
 
ZDM-2HA865 is a new generation DSP digital step closed - loop driver
Using advanced vector closed loop control technology, the traditional open loop stepper motor is completely 
overcome
The problem of step loss, and significantly improve the high-speed performance of stepper motor, reduce the motor
The heating degree and reduce the vibration of the motor, further improve the working speed of the equipment
Degree and precision, reduce equipment energy consumption. In addition, when the motor is continuously 
overloaded,
The driver will output an alarm signal with the same reliability as the ac servo system.
Suitable motor mounting dimensions with traditional (57/60) and 86 series stepper motors
Fully compatible, traditional open loop stepper drive scheme can achieve seamless upgrades, and
Compared with the traditional ac servo system, the cost is very high.


Technical characteristics
 
· New DSP chip for 32-bit motor control;
· Advanced vector closed loop control technology;
·LED digital tube display button operation is intuitive and easy to operate;
· Static current and dynamic current can be set arbitrarily (0--7.2A range);
· Adaptive drive (57/60) and 86 series hybrid closed loop stepper motors;
· Input/output of photoelectric isolation signal;
. Pulse response frequency up to 200KHz;
·16 general subdivision options with a maximum of 256 subdivisions(51200 pulses/rotations);
· provide electronic gear matching to various pulse sources (any subdivided value);
· protection of over-current, over-heat, over-voltage and tracking error;


We also supply other Motors
1.DC Motor
2.AC Motor
3.Gear Motor
4.Brush DC Motor
5.Brushless DC Motor
6.Gear Box
7.Electromagnetic motor
8.Permanent magnet motor
9.Asynchronous motor
10.Synchronous motor
11.Inverter motor
12.Linear Motor
13.Motor Parts
NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor
Factory Show

NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper MotorNEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper MotorNEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor

Feedback from Customers
NEMA 23 2nm 4.2A Motor with Encoder Closed Loop Stepper Motor
 
Joining in Us,Creat a WIN-WIN


FAQ
-----------------------------------------------------------------------------------------------------
Q1 What is your terms of payment?
A1: For small order,directly pay to us after order confirmed. You pay us online after we make the trade assureance order and send payment link to you or you can pay by paypal.
A2: For big order,we use T/T, 30% in advance, balance paid before shipment.
 
Q2 What is your terms of delivery?
A: FOB Shanghai,Guangzhou, Shenzhen, Ningbo. Or CIF/FCA/DDP
 
Q3 How about your delivery time?
A: Generally, for stock goods, we send the goods as soon as we get your payment. for big order, we should consider the detailed request,then decide a time.
 
Q4 Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
 
Q5 What is your sample policy?
A: We can supply the sample if we have ready parts in stock,sample is free of charge, but customers have to pay the freight cost.
 
Q6 How do you make our business long-term and good relationship?
A1: We keep good quality and competitive price to ensure our customers' benefit;
A2: We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Our Service
------------------------------------------------------------------------------------------------------
1.One year warranty for most of our products;
2.We will arrange delivery of the goods on time:
3.Within the warranty period, we will bear all the qulity problem of our produts;
4.Beyond the warranty period, we will despatch the replacement parts to help fix the products;
5.Without any problem, we will gain the feedbacks of our products to help improve better products.

You Might Also Like