BOPP Holographic Laminating Film with EVA Glue

China BOPP Holographic Laminating Film with EVA Glue, Find details about China Holography Laminating Film, Laser Laminating Film from BOPP Holographic Laminating Film with EVA Glue

Model NO.
BH-30mic BT-40mic
Trademark
FSEKO
Specification
SGS RoHS
Origin
Foshan, China
HS Code
39202090
Model NO.
BH-30mic BT-40mic
Trademark
FSEKO
Specification
SGS RoHS
Origin
Foshan, China
HS Code
39202090
*Material

Surface layer: BOPP
Glue layer: EVA adhesive


*Specification

Thickness: 30mic
Width: 300~1000mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2
 
BOPP Holographic Laminating Film with EVA Glue
BOPP Holographic Laminating Film with EVA Glue
BOPP Holographic Laminating Film with EVA Glue



*Process parameter:

Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min

 
BOPP Holographic Laminating Film with EVA Glue
BOPP Holographic Laminating Film with EVA Glue
BOPP Holographic Laminating Film with EVA Glue


 
 

*Directions for using BOPP thermal laminating film:

Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.


*Packaging:
 
BOPP Holographic Laminating Film with EVA Glue
BOPP Holographic Laminating Film with EVA Glue
BOPP Holographic Laminating Film with EVA Glue