Products

Graphite Mould for Exothermic Weld

China Graphite Mould for Exothermic Weld, Find details about China Graphite, Pyrolytic Graphite Sheet/Plate from Graphite Mould for Exothermic Weld

Model NO.
according to the drawings
Ash
800pm
Flexural Strength
30-35
Compressive Strength
60-70
Density
1.80-1.85
Trademark
BC
Transport Package
Export Packing
Specification
any sizes
Origin
China
HS Code
3801909000
Model NO.
according to the drawings
Ash
800pm
Flexural Strength
30-35
Compressive Strength
60-70
Density
1.80-1.85
Trademark
BC
Transport Package
Export Packing
Specification
any sizes
Origin
China
HS Code
3801909000
Advantage:

Exothermic chemical reaction using a solvent as a heat source, produce High temperature (instantaneous temperature reaches 2787 degrees heat) and by welding the weld mode to achieve the purpose of welding,  it does not need to provide power. It is the best method of welding metal conductor. Can complete fusion between the same or different copper and coppe, copper and steel, to the true binding molecule, welding effect become permanent maintenance.

Operation Step:

Making a WELD joint is a simple procedure as illustrated below:
 
 
Step 1Locate the conductors (A) to be joined in the weld cavity (B) and close the mould (C).
Step 2Locate the steel retaining disc in the base of the crucible (D). Pour in the weld powder (E) followed by the starting powder (F). Ignite starting powder with a spark gun.
Step 3The resulting exothermic reaction reduces the weld powder to molten copper alloy which melts the retaining disc and flows into the weld cavity where it partially melts the conductors (G).
Step 4The molten copper alloy cools to leave a fusion weld of great mechanical and electrical integrity.
 

High Quality Graphite Mould for Exothermic Weld for Sale







Graphite Mould for Exothermic Weld
 

You Might Also Like