Products

Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC , 7012AC, P6, P6, P4

China Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4, Find details about China Angular Bearing, Angular Ball Bearing from Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4

Model NO.
7000AC
Trademark
TIK or your mark
Transport Package
Single Plastic Bag/Box/Carton/Pallet
Specification
7000AC
Origin
Sichuan
HS Code
8482103000
Model NO.
7000AC
Trademark
TIK or your mark
Transport Package
Single Plastic Bag/Box/Carton/Pallet
Specification
7000AC
Origin
Sichuan
HS Code
8482103000
Angular contact ball bearings are particularly suitable for carrying combined (axial and radial) loads. Sometimes, they also can carry pure axial load and operate in higher speed. Under radial load, axial component force will be produced which must be counteracted. So the bearings are normally adjustable against a second bearing.        
Single row angular contact ball bearings can carry axial load acting in one direction only. In many applications, angular contact ball bearings in pairs or multi-arrangement should be used. The axial load carrying capacity of angular contact ball bearings increases with the increase of contact angle.

Features
Individual bearings of this type are capable of taking radial loads and also axial loads in one direction. Contact angles of 15°, 25°, 30°, and 40° are available. The larger the contact angle, the higher the axial load capacity. For high-speed operation, however, the smaller contact angles are preferred. Usually, two bearings are used in duplex pairs, and the clearance between them must be adjusted properly.
Pressed steel cages are commonly used, however, for high precision bearings with a contact angle less than 30°, polyamide resin cages are often used.
Applications
These bearings are mainly applied in the machine tool spindles, high-frequency motors, gas turbines, oil pumps, air compressors, printing machines and other installations.
 
Model Number7000 series, 7200 series, 7300 series, 7400 series, 71800 series, 71900 series.
TypeAngular ball bearing.
Number of RowSingle row.  
Contact Angle15°, 25°, 40°.
MaterialSupreme bearing steel AISI 52100 or stainless steel AISI 440C.
Cage MaterialSteel, nylon, brass.
HardnessHRC 60-64.
Radial ClearanceC0, C2, C3, C4, C5.
Vibration & NoiseZ1V1, Z2V2, Z3V3.
Precision RatingABEC-1, ABEC-3, ABEC-5, ABEC-7, ABEC-9.
GreaseAs per your requirement, such as Chevron SRI-2 ,Multemp PS2, Shell Alvania R2, Changcheng 2 and so on.
CertificationsISO 9001:2015.
Brand NameTIK.
PackagePlastic tube package, single box package, industrial rolled package or as per buyer's requirement.
Place of OriginChina (Mainland).
Features(1) High precision;
(2) High speed;
(3) Low noise;
(4) Long life span.
ApplicationMachine tool spindle, high-frequency motor, gas turbine, centrifugal separator, front wheel of small car, 
differential pinion shaft etc.
Payment Term TT, L/C, Western Union or Paypal.
Port of LoadingShanghai, Tianjin, Qingdao or Ningbo.
SamplesFree samples are available.
 
Bearing No.Boundary dimensionsBasic load ratings(kN)Limiting speedMass
mmDynamicStaticrpmkg
dDBCrCorGreaseOil≈
7000AC102684.72.124,00032,0000.019 
7001AC122885.12.422,00028,0000.021 
7002AC153295.93.219,00025,0000.030 
7003AC1735106.33.616,00022,0000.040 
7004AC204212105.714,00019,0000.064 
7005AC25471211.1712,00017,0000.074 
7006AC30551314.49.89,50014,0000.110 
7007AC35621417.312.18,50012,0000.150 
7008AC40681518.714.18,00011,0000.180 
7009AC45751624.719.17,50010,0000.230 
7010AC50801625.320.56,7009,0000.250 
7011AC55901835.526.56,0008,0000.380 
7012AC6095183731.35,6007,5000.400 
7013AC65100183833.65,3007,0000.430 
7014AC701102045.840.95,0006,7000.600 
7015AC751152047.543.34,8006,3000.630 
7016AC801252257.5514,5006,0000.850 
7017AC85130225552.84,3005,6000.890 
7018AC901402471.768.74,0005,3001.150 
7019AC951452469.869.13,8005,0001.200 
7020AC100150246969.73,8005,0001.250 
7021AC1051602680.972.23,6004,8001.600 
7022AC1101702898.593.93,4004,6001.950 
7024AC12018028103.5104.52,8003,8002.100 
7026AC13020033122.4127.82,6003,4003.330 
7028AC14021033145.3152.82,4003,2003.460 
7030AC15022535174.2184.92,2003,0004.800 
7032AC16024038189.62092,0002,8005.260 
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
Single Row Angular Contact Ball Bearings 7000AC, 7001AC, 7002AC, 7003AC, 7004AC, 7005AC, 7006AC, 7007AC, 7008AC, 7009AC, 7010AC, 7011AC, 7012AC, P6, P6, P4
 

You Might Also Like