Products

Trapezoidal Shape Roofing Sheet Making Machine

China Trapezoidal Shape Roofing Sheet Making Machine, Find details about China Roll Forming Machine, Roofing Sheet Making Machine from Trapezoidal Shape Roofing Sheet Making Machine

Model NO.
1000
Use
Roof
Color
Blue
Suitble Material
Galvanized Steel, Aluminum
Power
5.5kw+4kw
After Sale Service
Engineer Available
Material Hardness
235MPa,345MPa
Driving of Forming Machine
by Chain
Voltage of Machine
380V,50Hz,or as Your Request
Shaft of Forming Machine
75/75/80mm
Application of Trapezoidal Machine
Roof Contractor
Trademark
JCX
Transport Package
According to Customers′ Request
Specification
CE/SGS
Origin
China Hebei
HS Code
84552210
Model NO.
1000
Use
Roof
Color
Blue
Suitble Material
Galvanized Steel, Aluminum
Power
5.5kw+4kw
After Sale Service
Engineer Available
Material Hardness
235MPa,345MPa
Driving of Forming Machine
by Chain
Voltage of Machine
380V,50Hz,or as Your Request
Shaft of Forming Machine
75/75/80mm
Application of Trapezoidal Machine
Roof Contractor
Trademark
JCX
Transport Package
According to Customers′ Request
Specification
CE/SGS
Origin
China Hebei
HS Code
84552210
Trapezoidal Shape Roofing Sheet Making Machine

Trapezoidal Shape Roofing Sheet Making Machine

trapezoidal sheet is the very basic roof sheet used for construction.It is widely used for workshop,warehouse,commercial building,residential house.
Our roll forming lines for trapezoidal sheet is automatic machine,use ppgi,galvanized,galvalume as raw material.It is composed of manual decoiler,feeding table,main forming part,automatic cutting.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.
Trapezoidal Shape Roofing Sheet Making Machine

 
Trapezoidal Shape Roofing Sheet Making Machine




A   Sheet Specifications
1.Coil TypePre-painted coil,Galvanized steel,Aluminum
2.Width1200mm
3.Thickness range1mm (max)
4.Yield stress(mm)Q235
 
B Roll Forming Lines For Trapezoidal Sheets Specifications
1.Power 
requirement
 		Type220v/380v/3ph/50hz 
  Main Motor power3kw 
  Cutter power3kw 
2.Forming speed(m/min)8-15Not include the time of cutting
3.Forming stations22  stations 
4.Material of rollersCR12 
5.Thickness of structure14mm 
6.Forming shaft diameter(mm)70 
7.Chains1 inch 
8.Type of cuttingHydraulic cutting 
9.Control system PLC Panasonic and  Inverter  
10.Install dimension(depend on the final design)12.8m×0.6m×1.2mWithout panel length
11.Total weight (Approx)10TDepend on final design
12.ScreenText screen /touch screen  
1. Nice appearence.2. Low noise.3. High efficiency.4. Good quality.5. Esay control.
Manual decoiler
It is passive type could load coil by expend the blots fix at coil inner diameter.It's easy to operate and economical solution.
Guiding device
Adopt guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming system. Can adjust the guiding bar with loosing the fixing bolts to feed sheet in right position. It's fixed structure to make sure can not move easily. 
Roll Forming Lines For Trapezoidal Sheets:
Roll forming system consist of machine frame, transmission system, electrical motor and roll forming system.
A. Machine frame adopts welding structure with shot blasting and painting treatment
B. All rollers material adopt high quality No.45 steel, with hard chrome coated on surface, all treatment by full CNC machines, to make sure the rollers with good rigidity and precision, and form perfect roofing sheet as per design.
C. All rolling shafts are made by high quality No.45 steel with quench and temper treatment, so the shafts with good rigidity which could use for long tern without deformation.
D. Rolling shafting supporting structure type is steel wall and welded with the basement together to have rigidity.
E. Cycloidal pin gear speed reducer motor driven, the back/forward roller driven by chain, part of upper/lower rollers driven by gear
F. Adjust the screw bar manually to adjust the distance between upper/lower rollers for difference thickness of sheet.
(Attention: all rolling system has adjusted in our company as a perfect situation, we don't suggest to adjust the rollers at random, if necessary, should adjust by a experienced technician or after train by our engineer. Otherwise will cause the machine can not form a good profile
Cutting device
 
A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted.
B. Adopts welded frame for good rigidity.
C. The cutting action is droved by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life.
Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pumps drive the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.
Power of the oil pump: 3kw
Hydraulic oil :40#
PLC control system
 
It adopts industrial computer to control. The target piece's length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Processing precision : within 1.00mm
It contains liquid crystal screen, programmer, transformer for the electronic machines and kits of every part. Touch screen
PLC is Taiwan Panasonic
Transducer brand is taiwan taida
The seller should provide Chinese and English language screen
Counter
One counter gauges length, pulses, and decides length.
Trapezoidal Shape Roofing Sheet Making Machine


 

You Might Also Like