Zd Electric Speed Reduction Micro 90mm Gn Type AC Speed Control Gear Motor for Forklift
China Zd Electric Speed Reduction Micro 90mm Gn Type AC Speed Control Gear Motor for Forklift, Find details about China AC Motor, Speed Control AC Gear Motor from Zd Electric Speed Reduction Micro 90mm Gn Type AC Speed Control Gear Motor for Forklift
ZD Electric Speed Reduction Micro 90mm GN Type AC Speed Control Gear Motor for Forklift
Speed control AC motor is a unit of the controller and motor, the speed can be easily adjusted by the potentiometer. The higher of its speed, the larger of its power; the lower of the speed, the smaller of the torque, and the starting torque remains unchanged. It is widely used in packaging industry, automation area, forklift, ice maker and medical industry, etc.
The Features of Speed Control Motor:
3.Please don't run motor at low speed for long time to avoid overheat.
How To Read
Motor :
5 I K 40 R GN - C T
a b c d e f g h
| a | Frame size | 5 = 90mm |
| b | Motor Type | I: Induction Motor R: Reversible Motor T: Torque Motor |
| c | Series | K: K series |
| d | Output power (W) | (e.g) 6: 6W |
| e | The auffix "-R" after the output power means speed adjustable motor. | |
| f | Motor shaft type | GN: GN type gear shaft GU: GU type gear shaft A: Circular shaft type A1: Keyway type |
| g | Voltage - Poles | A: Single-phase 110V 50/60Hz 4P B: Single-phase 110V 50Hz 2P C: Single-phase 220V/230 50Hz 4P D: Single-phase 220V 50Hz 2P E: Single-phase 110V/120 60Hz 4P H: Single-phase 220V/230 60Hz 4P S: Three-phase 200V/220V//230V 50/60Hz 4P S3:Three-phase 380V/400V//415V 50/60Hz 4P T: Three-phase 200V/220V//230V 50/60Hz 2P T3:Three-phase 380V/400V//415V 50/60Hz 4P |
| h | T: with terminal box F:with fan FF: with enhanced fan M: with brake | |
Gearbox:
5 GN 3 K
a b c d
| a | Frame size | 5 = 90mm |
| b | Type of output shaft | GN: GN type gear shaft GU: GU type gear shaft |
| c | Reduction Ratio | (e.g) 50 = 1:50 |
| d | Bearing Type | K: Ball bearing KB: Enhanced ball bearing (For GU type) |
Continuous Rating
| Model Type Lead Wire Type | Output power (W) | Voltage (V) | Frequency (Hz) | Speed Control Range (r/min) | Allowable Torque | Starting Torque (mN.m) | Current (A) | Capacitor (μF) | ||
| Gear shaft type | Circular shaft type | 1200r/min mN.m | 90r/min mN.m | |||||||
| 5IK40RGN-A | 5IK40RA-A | 40 | 1ph 100 | 50 | 90~1350 | 260 | 70 | 180 | 0.65 | 12.0 |
| 60 | 90~1650 | 0.70 | ||||||||
| 5IK40RGN-E | 5IK40RA-E | 40 | 1ph 110 | 60 | 90~1650 | 260 | 65 | 180 | 0.55 | 8.0 |
| 1ph 120 | 0.60 | |||||||||
| 5IK40RGN-C | 5IK40RA-C | 40 | 1ph 220 | 50 | 90~1350 | 300 | 70 | 160 | 0.35 | 2.5 |
| 1ph 230 | 0.40 | |||||||||
| 5IK40RGN-H | 5IK40RA-H | 40 | 1ph 220 | 60 | 90~1650 | 230 | 70 | 145 | 0.35 | 2.5 |
| 1ph 230 | 0.40 | |||||||||
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.
Note: "-A" means the voltage 110V, the assembly capacitor value it is according the label.
| Model Type Lead Wire Type | Output power (W) | Voltage (V) | Frequency (Hz) | Speed Control Range (r/min) | Allowable Torque | Starting Torque (mN.m) | Current (A) | Capacitor (μF) | ||
| Gear shaft type | Circular shaft type | 1200r/min mN.m | 90r/min mN.m | |||||||
| 5IK60RGN-A | 5IK60RA-A | 60 | 1ph 100 | 50 | 90~1350 | 460 | 140 | 265 | 1.00 | 20.0 |
| 60 | 90~1650 | 490 | 160 | 1.10 | ||||||
| 5IK60RGN-E | 5IK60RA-E | 60 | 1ph 110 | 60 | 90~1650 | 490 | 160 | 265 | 0.80 | 12.0 |
| 1ph 120 | 0.85 | |||||||||
| 5IK60RGN-C | 5IK60RA-C | 60 | 1ph 220 | 50 | 90~1350 | 490 | 140 | 265 | 0.50 | 4.0 |
| 1ph 230 | 0.55 | |||||||||
| 5IK60RGN-H | 5IK60RA-H | 60 | 1ph 220 | 60 | 90~1650 | 490 | 160 | 265 | 0.50 | 4.0 |
| 1ph 230 | 0.55 | |||||||||
Note: "-A" means the voltage 110V, the assembly capacitor value it is according the label.
Dimensions(Unit: mm):
Gear Motor-Torque Table
•Gearbox and mid-gearbox can be sold separately.
•Enter the gear ratio in the box ( ) within the model name.
•The gray background indicates the same rotating direction of the motor while the rotating direction of others are opposite.
•The speed is calculated by dividing the motor's synchronous speed (50Hz: 1500r/min, 60Hz: 1800r/min) by the gear ratio.The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
•To reduce the speed beyond the gear ratio in the table, attach a decimal gearbox (gear ratio: 10) between the gearbox and motor. In that case, the permissible torque is 3 N.m.
Allowable Torque of 5IK40RGN-( ) Unit: Upside (N.m)/Below-side (N.m)
| Type Motor/Gearbox | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | |
| Speed (r/min) | 50Hz | 500 | 417 | 300 | 250 | 200 | 166 | 150 | 120 | 100 | 83 | 75 | 60 | |
| 60Hz | 600 | 500 | 360 | 300 | 240 | 200 | 180 | 144 | 120 | 100 | 90 | 72 | ||
| 5IK40RGN-A 5IK40RGN-E 5IK40RGN-C 5IK40RGN-H | 5GN ( )K | 50Hz | 0.77 | 0.92 | 1.30 | 1.50 | 1.90 | 2.30 | 2.38 | 3.20 | 3.80 | 4.60 | 4.88 | 5.70 |
| 7.85 | 9.38 | 13.2 | 15.3 | 19.4 | 23.4 | 24.3 | 32.6 | 38.7 | 46.9 | 49.8 | 58.1 | |||
| 60Hz | 0.63 | 0.76 | 1.10 | 1.30 | 1.60 | 1.90 | 2.00 | 2.60 | 3.20 | 3.80 | 4.07 | 4.70 | ||
| 6.42 | 7.75 | 11.2 | 13.2 | 16.3 | 19.3 | 20.4 | 26.5 | 32.6 | 38.7 | 41.5 | 47.9 | |||
| Type Motor/Gearbox | Gear Ratio | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 | |
| Speed (r/min) | 50Hz | 50 | 41 | 37 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 | 7.5 | |
| 60Hz | 60 | 50 | 45 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 | ||
| 5IK40RGN-A 5IK40RGN-E 5IK40RGN-C 5IK40RGN-H | 5GN ( )K | 50Hz | 6.90 | 8.30 | 8.57 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 |
| 70.4 | 84.7 | 87.4 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||
| 60Hz | 5.70 | 6.80 | 7.19 | 8.60 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | ||
| 58.1 | 69.3 | 73.4 | 87.7 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||
Allowable Torque of 5IKR60GN-( ) Unit: Upside (N.m)/Below-side (N.m)
| Type Motor/Gearbox | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | |
| Speed (r/min) | 50Hz | 500 | 417 | 300 | 250 | 200 | 166 | 150 | 120 | 100 | 83 | 75 | 60 | |
| 60Hz | 600 | 500 | 360 | 300 | 240 | 200 | 180 | 144 | 120 | 100 | 90 | 72 | ||
| 5IK60RGN-A 5IK60RGN-E 5IK60RGN-C 5IK60RGN-H | 5GN ( )K | 50Hz | 1.10 | 1.40 | 1.90 | 2.30 | 2.90 | 3.40 | 3.57 | 4.80 | 5.70 | 6.80 | 7.03 | 8.60 |
| 11.2 | 14.2 | 19.3 | 23.4 | 29.6 | 34.7 | 36.4 | 48.9 | 58.1 | 69.3 | 71.7 | 87.7 | |||
| 60Hz | 0.92 | 1.10 | 1.50 | 1.80 | 2.30 | 2.80 | 2.99 | 3.80 | 4.60 | 5.50 | 5.70 | 6.90 | ||
| 9.38 | 11.2 | 15.3 | 18.3 | 23.4 | 28.5 | 30.5 | 38.7 | 46.9 | 56.1 | 58.2 | 70.1 | |||
| Type Motor/Gearbox | Gear Ratio | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 | |
| Speed (r/min) | 50Hz | 50 | 41 | 37 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 | 7.5 | |
| 60Hz | 60 | 50 | 45 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 | ||
| 5IK60RGN-A 5IK60RGN-E 5IK60RGN-C 5IK60RGN-H | 5GN ( )K | 50Hz | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 |
| 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||
| 60Hz | 8.30 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | 10.0 | ||
| 84.7 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||
Wiring Diagram
Other models of Micro AC Induction Gear Motor
1.Maintenance time & Warranty: 1 year after leaving factory
2.Other service: Including modeling selection guide, installation guide, and problem shooting guide, etc.
Q: What're your main products?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, High Precision Planetary Gearbox and Precision Cycloidal Gearbox etc.. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of molds are necessory to be developped which may need exact cost and design charging.
Q: What's your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine