Products

Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment ( TCL -3) with Manual Gun

China Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun, Find details about China Powder Coating Equipment, Powder Coating Gun from Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun

Model NO.
TCL-3
Method Type
Manual
Condition
New
Type Machine
Manual Powder Coating
with Gun
Manual Powder Coating Gun
Screen
Digital Display
Hopper
55L
Type of Shipping
Express/Air Transport/Land Transpor/Ocean Shipping
Delivery Detail
Shipped in 10 Days After Payment
Trademark
Customized/Galin
Transport Package
Carton, High-Strength Cardboard
Specification
Normal
Origin
Shandong, China
HS Code
84243000
Model NO.
TCL-3
Method Type
Manual
Condition
New
Type Machine
Manual Powder Coating
with Gun
Manual Powder Coating Gun
Screen
Digital Display
Hopper
55L
Type of Shipping
Express/Air Transport/Land Transpor/Ocean Shipping
Delivery Detail
Shipped in 10 Days After Payment
Trademark
Customized/Galin
Transport Package
Carton, High-Strength Cardboard
Specification
Normal
Origin
Shandong, China
HS Code
84243000
Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment
(TCL-3) with Manual Gun
Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun
Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun
 
GALIN POWDER COATING EQUIPMENT (TCL-3) ELECTRICAL DATA
Nominal input voltage220V (100V-240VAC)
Frequency50/60 Hz
Input power40 VA
Rated output voltage(to gun)12~18VPP
Rated output frequency(to gun)About20KHZ
Protection typeIP54
Temperature rang+10ºC to +40ºC
(+50ºF to +104ºF)
Solenoid Valve Voltage24VDC
Gun output voltage0-100KVDC
Gun output current0-100μA
GALIN POWDER COATING EQUIPMENT (TCL-3)  PNEUMATICAL DATA
MAX.input pressure8bar
MIN.input pressure5bar
Output pressure0~8bar
Max.water vapor content ofthe compressed air1.3g/m³
Max.oil vapor content of the compressed air0.1mg/m³
Max.compressed air consumption19Nm³/h
Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun
GALIN POWDER COATING EQUIPMENT (TCL-3) GUN PARAMETER
All the guns in the pictures match the Galin TCL-3 Equipment
Input12~18VPP
Voltage FrequencyAround 22KHZ
Input Current<0.5A
Output Voltage15~100KV Negative
Max.Output powder volumeAround 600G/MIN
Gun cable4 M
Gun weight425g

Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun

Galin powder coating Equipment can be used for Hub
Galin powder coating Equipment can be used for Furnitur
Galin powder coating Equipment can be used for Metal Rail
Galin powder coating Equipment can be used for Metal products
Galin powder coating Equipment can be used for Glass products
Galin powder coating Equipment can be used for Metal or Glass Cup
Galin powder coating Equipment can be used for Any Metal or Glass you want
Galin Manual powder coating Equipment (TCL-3) can be used for Grooves and Corners
Galin Manual powder coating Equipment (TCL-3) can be used for Complex and Difficult Workpiece


Galin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual GunGalin Metal Manual Electroc Powder Coating/Spray/Paint Equipment (TCL-3) with Manual Gun
CLEANING AND MAINTENANCE
  1. Daily Maintenance
  1. Clean the injector
  2. Clean the powder gun
  3. Clean the powder hose and suction unit
  1. Weekly Maintenance
  1. Clean suction unit,injector,Powder Clean module and powder gun
  2. Check the control unit grounding connections to the coating booth bolts,
     the suspension devices of the work pieces,or the conveyor.


TROUBLESHOOTING GUIDE

If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
 
Error/causeTroubleshooting
Injector nozzle, non-return valve unit, powder hose or
powder gun are clogged		Clean the corresponding parts and if necessary,replace them
Conveying vacuum too lowIncrease the powder quantity and/ or total air volume on the control unit
Insert sleeve worn , 
not or incorrect inserted		Replace or insert it ,observe the indexing cam
Insert sleeve is worm after
a short operating duration		Clean the nozzle ,if damaged,replaced it
The gun does not spray powder although the control unit
 is switched on and the
 gun trigger is pressed		1.Connect the equipment to the compressed air
2.Clean /Replace                                            
3.Clean the corresponding                              
4.Contact Galin representative                        

You Might Also Like