I.Product Models: CPU20J

The TDI-based System Machine is fit for making casting type polyurethane Elastomer products.

TDI Polyurethane PU Casting Machine

II.Key Features:
 Mineral Sieve Mesh Machine 

1.The raw material tank adopts the hot air circulation of electric heating, which makes heating faster, efficient, energy saving, safe and environmental protection.

2. High-temperature resistant low-speed high-precision metering pump; accurate matching, flexible adjustment, and measurement accuracy error: ≤±0.5%.
3. Independent PLC control system in the branch temperature controller of each group, with special electric heating system, oven, piping and values which can be adjusted separately; multi-point temperature control device is used to ensure that the raw material to maintain a constant temperature throughout the cycle process; temperature error: ≤2ºC.
4. The mixing device is reasonably designed
5. The color paste directly goes into the mixing device; different colors can be switched at any time; the mixing is uniform and the metering is accurate.
6. Imported Siemens PLC controller to monitor the entire control system; it will automatically make the judgment of abnormity, diagnosis and alarm, abnormal factors display, PLC module control, casting, automatic cleaning, and air blast; stable performance and strong operability.
7. Vacuum degassing system.
8.Direct injection of additives into the mixing chamber.
9. Mechanical seal.
10. The electric heating and a multipoint temperature control device.
11.Excellent dynamic tooth type design
12.Mechanical seal structure avoids reflux problem.
13.Accurate measurement, homogeneous mix and no bubbles.

14.The machine can be custom-tailored in order to satisfy any specific request

15.The number of components and pigments tailored according to the buyer's requirements.

16.Thermo-regulating system is fully verifiable and adjustable.

17.Dynamic mixing head mounted on a supporting arm or a pouring trolley.
18.Washing system to flush the mixer and mixing chamber automatically after pouring.

19.TDI machines can be equipped with either mass flow meters or a manual calibration system

20.Up to 33 formulations