Engine Specifications:

Model: 6CTA8.3-G1
Air Intake System: Turbocharger
Fuel System: PB/W type fuel pump
Cylinder Arrangement: 6 in line
Displacement: 8.3L
Bore and Stroke: 114×135 mm
Compression Ratio: 17:1
Rated RPM: 1500rpm
Maximum Output Power: 163KW
Governor Type: Mechanical
Exhaust System
Exhaust Gas Flow: 34.7m3/min
Exhaust Temperature: 570ºC
Max Back Pressure: 10kPa
Air Intake System
Max Intake Restriction: 6kPa
Burning Capacity: 12.4m3/min
Air Flow: 238m3 /min
Fuel System
100%( Prime Power) Load: 215 g/Kw.h
75%(Prime Power) Load: 211 g/Kw.h
50%(Prime Power) Load: 216 g/Kw.h
100%( Prime Power) Load: 39.7L/h
Oil System
Total Oil Capacity: 23.8L
Oil Consumption: ≤4g/kwh
Engine Oil Tank Capacity: 18.9L
Oil Pressure at Rated RPM: 276-414kPa
Cooling System
Total Coolant Capacity: 34L
Thermostat: 82-95ºC
Max Water Temperature: 104ºC

The list of Gen-set Engine Models:

Test before shippment

- Each Generator Set shall be put into commission more than 4 hours totally, tested on idle load, fully load and

10% overload.

- Noise level shall be tested.

- All of the meters on the control panel shall be tested.

- The appearance of the Set and the label, nameplate shall be tested. "

-Voltage available: 50Hz: 380-400-415V/ 220-230-240V; 60Hz: 220-380-416-440-480V/ 110-208-220-

240V. Any special voltage is also available as cilent's request.

Photo of 6CTA8.3-G1:



We can also provide ORIGINAL CUMMINS engines used for Industry, Construction,Truck,Coach,Bus, Marine, Generator Set and Water pump. ....
More details, please contact us by email or call.