Products

Customized Centrifugal Casting Brass C86300 Bushing in China

Customized Centrifugal Casting Brass C86300 Bushing in China, Find details about China Brass Bushing, Bronze Bushing from Customized Centrifugal Casting Brass C86300 Bushing in China

Model NO.
CB012
Coating
Anti-Rust Oil
Machining Tolerance
+/-0.02mm
Standard
AISI
Certification
ISO 9001:2000, ISO 9001:2008
Trademark
ODM
Transport Package
Carton and Wooden Box, Customer′s Request
Specification
OD: 50-2000mm
Origin
China
Model NO.
CB012
Coating
Anti-Rust Oil
Machining Tolerance
+/-0.02mm
Standard
AISI
Certification
ISO 9001:2000, ISO 9001:2008
Trademark
ODM
Transport Package
Carton and Wooden Box, Customer′s Request
Specification
OD: 50-2000mm
Origin
China
  • Customized centrifugal casting Brass C86300 Bushing in China
     
  • Material (can be customized):
     
    Material grade
    (GB)    		Main featuresApplications
    ZCuPb10Sn10Lubrication performance, wear resistance and corrosion resistant performance is good, suitable for bimetal casting materialsSurface pressure is high, and there is the lateral pressure of the sliding bearing, such as rolling rolling, vehicle use bearing, load peaks 60 mpa hit parts, as well as the highest peak of 100 mpa bimetallic bearing bush of the internal combustion engine, and the piston pin sets, lining, etc.
    ZCuPb15Sn8Under the condition of lack of lubricant and use water quality lubricants, sliding and lubricating, free cutting, casting performance is poor, for dilute sulfuric acid corrosion resistant performance is goodSurface pressure is high, and the lateral pressure of bearing, copper cooling pipe can be made from cold rolling mill, impact resistance load of up to 50 mpa parts, internal combustion engines of bimetallic bearing, mainly used for the biggest load of 70 mpa of piston pin set, acid-proof accessories
    ZCuPb20Sn5At higher sliding performance, in the absence of a lubricating medium and water as medium are particularly good self-lubricating performance suitable for bimetal casting material, sulfuric acid corrosion resistance, easy cutting, casting performance is poorHigh sliding speed of the bearing, and crusher, water pump, cold rolling mill bearings, piston pin load of 70 mpa
    ZCuPb30Have good self-lubrication, free cutting, casting performance is poor, easy to produce the gravity segregationHigh sliding velocity of bimetallic bearing shell, wearing parts, etc.
    ZCuZn25Al6Fe3Mn3With high mechanical properties, the casting performance is good, good corrosion resistance, has a tendency to stress corrosionSuitable for high strength, wear parts, such as bridge plate, nut, screw, wear-resistant plate, the slider, and worm gear, etc
     
    ZCuZn26Al4Fe3Mn3With high mechanical properties, the casting performance is good, in the air, water, and seawater corrosion resistance is good, can be weldedRequire high strength, corrosion resistant parts
    ZCuZn38Mn2Pb2Have higher mechanical properties and good corrosion resistance, abrasion resistance, good cutting performanceGeneral purpose structure, ship, instrument appearance, simple casting using such as sleeve, sleeve, bearings, slider, etc
    ZCuZn40Mn3Fe1With high mechanical properties, good casting properties and machinability, and in the air, water, and water has good corrosion resistance, has a tendency to stress corrosion crackingSeawater corrosion parts, pipe fittings and under 300 °C, manufacturing and other large Marine propeller castings
    ZCuZn33Pb2Structural material, feed temperature is 90 °C when good oxidation resistance, electrical conductivity of about 10 ~ 14 ms/mThe shell of gas and water supply equipment, machinery manufacturing, electronics, precision instruments and optical instruments of component parts
    Other standard and materialASTM, JIS, AISI, EN, BS;
    Manganese brass: C86300 and etc.;
    Tin bronze: C83600, C93200, CuSn12, CuSn7Zn4Pb7 and etc.;
    Aluminum Bronze: C62900, C95400, C95500, CuAl10Fe5Ni5 and etc..
  • General Products Application/Service Area

    Engineering machinery, mining machinery, industry and etc.;
    Grab, earthmover, pushdozer, crushing mill, kibbler and etc..
     
  • Unit weight: 0.5-5000 kg per piece
     
  • Size:
    OD (Eccentric and Concentric): 50-2000 mm;
     
  • Packing: Carton and wooden box, according to customer's request 
  • Production Capacity: 1500Mt per month
  • Duration of pattern-making and sample-making: Within 30 days (Vary subject to the complexity of products) 
  • Minimum order: No limit
  • Delivery: Within 25 days after signing of contract and confirmation of samples by client
     
  • Required documents for offer to be provided by customer:

    Drawings with formats of IGS (3D), DWG or DXF (Auto CAD 2D), PDF, JPG
    Standard of material (Preferable to provide Element Percentage of C, Si, Mn, P, S, etc and Physical/Machanical Properties of the material)
    Technical requirements
    Unit Weight of Rough
     
  • Technological process:

    Prepare raw material - centrifugal casting - detection of material component - flaw detection - water toughening - metallographic inspection - rough machining - finish machining - dimensional inspection - packing - shipments
     
  • Workshop:

    Customized Centrifugal Casting Brass C86300 Bushing in China
    Customized Centrifugal Casting Brass C86300 Bushing in China

    Customized Centrifugal Casting Brass C86300 Bushing in China
     
  • Testing equipments:

    Customized Centrifugal Casting Brass C86300 Bushing in China
     
  • Shipments:

    Customized Centrifugal Casting Brass C86300 Bushing in China
     
  • Company information:

    Customized Centrifugal Casting Brass C86300 Bushing in China
     
  • Certifications:

    Customized Centrifugal Casting Brass C86300 Bushing in China
     
  • Contact information:

    Customized Centrifugal Casting Brass C86300 Bushing in China

You Might Also Like