Basic Info.

Model NO.

BHFS-5-16A/80

HS Code

843131090

Model NO.

BHFS-5-16A/80

HS Code

843131090

Product Desciption

Product Name: 16mm square Sliding Contact Line for building hoist vertical power supply
Overview: Our product is the power supply device used in industrial elevators, construction hoists, Trasport platforms, Material Hoists, Mast climbing work platforms which can replace traditional cables. The Sliding Contact Line is the device that composed of Current Collector, Conductive Conduits which hold Conductive Rails, and relative components.

Specifications: BHFS-5-16A/80
Size: 3.016m
Rated Current: 80A
Rated Voltage: 380/690V
Structure: 3 phases, 1 neutral and 1 ground

Our Partner: (Hoist Manufacturer, Rental Company and Engineering Company)
Alimak, Scanclimber, Maber, TW, GJJ, ZOONLION, SANSEI, LIFTEC, XMT, YHX

Our Market: Southeast Asia, Middle East, Europe, South American
Our Qualified Certification: ISO9001:2015, CQC and CE

Advantages compare to hoist cable:
The Conductor Rail was locked on mast section vertically, it shows advantages,
1. Don't worry break down in strong wind
2. No onload extra weight on cages
3. Longlife Span for 4-6 years
4. Easy adding the height by vertical insert piece by piece
5. Don't need to change for the whole piece when some parts damage
6. Can use by recycle
7. Safe and high effeciency 

Product Photos:

Technical Data Sheet

NO	ITEM	PARAMETER
1	Rated Current	80A
2	Rated Voltage	380V
3	Power Supply Mode	Three-Phase Five Wire
4	Dimension	3016x60x54mm
5	Weight	6.8kg
6	Insulation Resistance	≥0.5MΩ
7	Dielectric Withstanding Voltage	AC 3750V, No Breakdown and Flickering within 1 Min
8	Protection Grade of Shell	IP23
9	Electrothermal Stability	20times/rated 1s
10	Rated Short-time Withstand Current & Rated Peak Withstand Current	4.5KA/6.75KA
11	Ambient Features	1.Heat Resistance Test: Normal Type +55°C 2.Low Temperature Resistance Test -30°C 3.Heat and Humidity Test: Relative Humidity 95%,+25°C 4. Air Pressure: 86-106KPa
12	Flame Resistance	V0 Grade
13	Parameter of Sliding Contact Line Power Transmission	Compliant with National Standard GB/T3048 <cable conductor> Resistance ≤0.028Ωmm2/(+20°C)
14	Current Collector	Traction Force: F < 80N; Traveling Speed:V≤100m/min
15	Electric Brush Parameter	Running 2000km, Wear < 0.8mm Brush Effective Wear: 5-7mm; Effective Working Pressure:1.8-4.08N/cm2;

Usage Scenarios

↓
 

If you find any interest please contact us at any time!