Electrical Manipulator Glass Lifting Robot Glazing Robot Heavy Loadwindow Instal Lifting Equipment

China Electrical Manipulator Glass Lifting Robot Glazing Robot Heavy Loadwindow Instal Lifting Equipment, Find details about China Electrical Sucker, Glass Robot from Electrical Manipulator Glass Lifting Robot Glazing Robot Heavy Loadwindow Instal Lifting Equipment

Basic Info.

After-sales Service

18 Years

Movable Type

Remote Control

Driven

Electrical

Voltage

380V, 50Hz, 3 Phase

Trademark

Toyo

Transport Package

Wooden

Specification

2.6*1.05*1.8m

Origin

China

HS Code

846420100

After-sales Service

18 Years

Movable Type

Remote Control

Driven

Electrical

Voltage

380V, 50Hz, 3 Phase

Trademark

Toyo

Transport Package

Wooden

Specification

2.6*1.05*1.8m

Origin

China

HS Code

846420100

Product Desciption

Glass Glazing Robot

General Description:

One of our top seller products glass robot, which is combining the advantages of a Crane Truck and Vacuum Lifter, providing the economy and efficiency of the robot.

1. Double system control: one vacuum system for working, and one for alternate;

2. Adopt American THOMAS vacuum pump, Italy METALROTA heavy type driving wheels, Swiss BUCHER power unit, and intelligent maintenance-free battery, during the use, without air source or power supply, it can achieve electric walking, lifting, lowering, taking, and releasing air by electrical. Manually rotated 360 degrees in the vertical type, and manually rotated 90 degrees in the horizontal type.

3. With Japan PANASONIC digital display vacuum pressure switch and battery fuel gauge, clearly monitor the safe operation of the equipment.

4. With a vacuum pressure auto supply system to ensure the whole vacuum system maintained at a relatively constant safety pressure value, If there is an unexpected power failure, the pressure holding function can extend the emergency handling time, it is safer to use.

5. Adjustable design can be changed the position of the suction cups and assembled in various ways according to needs, each suction cup equipped with a separate control valve can handle a glass of different shapes and sizes.

Detailed Pictures:

Electrical Manipulator Glass Lifting Heavy Loadwindow Instal Lifting Equipment

Electrical Manipulator Glass Lifting Heavy Loadwindow Instal Lifting Equipment

Specifications:

Glass Installation Robot	TAR-300	TAR-350	TAR-400	TAR-500	TAR-600	TAR-800
Rated Load Capacity	300KG	350KG	400KG	500KG	600KG	800KG
Battery	2*12/80V/A	2*12/90V/A	2*12/100V/A	2*12/120V/A		2*12/210V/A
Charger	24/12V/A		24/15V/A	24/18V/A		AC110-220V
Overall Length	2660mm			2800mm		3045mm
Driving Wheel Dimension	250*80mm			300*100mm		450*200mm
Drive motor	24/1200V/W					AC 24V/2.2KW
Overall Width	810mm					850mm
Pads Diameter	300mm					400mm
Manual Rotating	360°
Lifting Height	3500mm
Lift motor	24/2000V/W
Glass Size	3660*2440mm
Manipulation	Walkle Type

Main Specifications:

Maximum load: 600kg while the second ram back to end, 300kg while the second ram full extended
Maximum lifting height: 3500mm from ground to the center of the suction frame
Moving: automatically moving, speed control by manual roller sensibly
Lifting control: with a hydraulic ram, controlled by manual mechanism valve sensibly
Extension control: with a hydraulic ram, controlled by manual mechanism valve sensibly, maximum extension distance 650mm, maximum extension distance from the front wheel to the suction pads was 1350mm( the ram in parallel with the ground)
Tilting control: with a hydraulic ram, controlled by manual mechanism valve sensibly, the maximum tilting degree near to 130 degree
Rotation control: By manual, with a spring lock for positioning, the maximum rotation was 270 degree
Side moving: with a hydraulic ram, controlled by manual mechanism valve sensibly, 75mm for both sides, totally 150mm
Side turning: By manual, with a spring lock for positioning, the maximum rotation was 180 degree, 90 degrees for both sides
Power: DC 24V
Driven unit: the rear wheels driven with DC motor worked as a driven unit as well as for turning
Wheels: 400mm*150mm *2 solid tire in front, single wheel of 300mm in rear
Driven unit power: DC 24V brush-less motor, .1.2KW
Hydraulic station power:1.2KW
Battery: 12V,120A*2
Maximum working period: about 20 Hours
Charging power:220V
Charging time: about 8 hours
Vacuum system: Dual system
Suction frame sized of 1800mm(L) and 800mm(W)

Features:

1.Low noise and no pollution

2.Comfortable operation and convenient charge

3.Legerity turning, flexible, reliable operation

4.Big wheels design, easy for outdoor use.

5.Dual vacuum system design for safety

6.Adopt optimum design, have solid frame and wide vision

Company Introduction:

TOYOCC is specialized in glass-making machines, systems, and tools for a wide variety of glass production, storage, and installation need. With over 20 years experience, not only can we manufacture the core product, but also main long-term and trusty business partnership with well-known supplier both domestic and overseas.
ToYOCC's top-rated products include but not limited to glass grinding machines, glass cutting machines, glass handling& storage systems, laminating furnaces, and accessories.

Package:
For small parts, we usually deliver by DHL/FEDEX/UPS/TNT, etc.
For large size products, we usually deliver by air/by sea, or as your request.
We package cartons or wooden box as to avoid any damage during delivery.

FAQ:

1.Do you offer customized offers?
Yes, customized service can be offered.

2.What's the delivery time?
About 20 days.

3.How can I get the after-sales services?
We offer videos, pictures, and technical guidance immediately.

4.How can customers buy parts once they break down?
The lift adopts most of the common parts of hardware. You can buy the parts in your local hardware market or forklift parts shop.

5.How can customers repair if any problem?
One of the great advantages of the equipment is the very low failure rate. Even it breaks down, we can guide to repair it by video and repair instruction.

6.What's your QA&QC policy?
3times 100% inspection before shipping.