China 24V4a 100W AC DC LED Power Source with Ce RoHS FCC IEC Certificate, Find details about China Power Supply, LED Driver from 24V4a 100W AC DC LED Power Source with Ce RoHS FCC IEC Certificate
Model | HS-100-5 | HS-100-12 | HS-100-15 | HS-100-24 | HS-100-36 | HS-100-48 | |
output | DC voltage | 5V | 12V | 15V | 24V | 36V | 48V |
Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |
Rated current | 20A | 8.3A | 6.7A | 4.2A | 2.8A | 2A | |
Current range | 0~20A | 0~8.3A | 0~6.7A | 0~4.2A | 0~2.8A | 0~2A | |
Rated power | 100W | 99.6W | 100.5W | 100.8W | 100.8W | 96W | |
Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 150mvp-p | 150mvp-p | 180mvp-p | |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
input | Voltage range | 90~132VAC/180~264VAC(selected by switch),254~373VDC | |||||
frequency | 47~63HZ | ||||||
AC current | 2.4A/115VAC,1.2A/230VAC | ||||||
efficiency | 79% | 83% | 83% | 85% | 85% | 86% | |
Inrush current | Cold start current18A/115VAC,36A/230VAC | ||||||
Leakage current | < 3.5mA/240VAC | ||||||
protection | overload | Rated output power115%~150% start over load protection | |||||
protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 42.6~44.2V | 54.8~56.6V | |
protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
----- | ----- | ||||||
----- | |||||||
environment | Working temp,humidity | -10ºC~+60ºC,20%~90%RH | |||||
Storage temp,humidity | -20ºC~+85ºC,10%~95%RH non-condensing | ||||||
Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes | ||||||
safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||||
Fit standard | Safety standard | Compliance toUL1012 | |||||
EMC standard | Compliance toEN55022,CLASSA | ||||||
others | Dimension | 159*97*38mm(L*W*H) | |||||
Weight/packing | 0.48kg/45pcs/22.5kg/0.041 m³/1.45CUFT | ||||||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25ºCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |