QD Double Girder overhead crane
Design Concept
Our winch series overhead crane is widely used in machinery manufacturing, assembly room, and steel structure workshop. Computerized design of box section extremely maximum crane durability and efficiency regardless heavy loads, frequent operation as well as poor working condition. With possibilities to fit walkway to the crane which provide maintenance access to much critical part, in addition, more lift height savings by hook smoothly traveling between beams. Max loading capacity reach as high as 500 Tonne.
Technical Feature
Critical distance between crab and upper platform of box section beam is optimize designed with 70%~80% measurement which compared to traditional product, therefore, workshop capital is saved.
High torque motor transmit power through hardened-tooth gear box connect by high speed shaft, optional with D.C brake or Hydraulic brake system. The integrate drive units outfit with winch and end carriage provide optimum performance, high precision, low noise while operation. Available modular speed regulation fulfill slow speed, double speed, frequency speed requirements, provide for each motion, comprehensively meets individual requirements.
Outfit with overloading alarm device, hook clashing protector, intelligent automatic limit switch, various safety protection measurement offer a more reliable operate experience.
- Heavy Duty Winch Hosting System
- Work Duty can be designed to A5, A6, A7 and A8
- Hydraulic Brake for hoist and trolley
- Heavy duty gearbox
- IF44, IP54, F degree motor
- Heavy Duty Long Travel System
Technical Features
1. QD type 20t overhead crane, its trolley is bigger and stronger than LH type as the trolley contains motor, reducer and brake separately.
2. And this is the most important factor for working 24 hours per day.
3. The capacity is up to 650t and the lifting height is up to 100m, which can bearing most of the loading work.
4. The power supply is 380V, 400V, 415V, 440V, also can be customized.
Advantages
1. The quality of the main girder decides use age and use cost of the crane. "shengqi" consummately adopt European most advanced design and manufacture craft of the main girder. Mail girder wear well , not only let user ease use, but also low maintenance cost.
2. The up camber curve of main girder adopt optimize 4 times curve, ensure traveling have no upgrade resistance when full loading. Overcome the disfigurement of traveling motor overload traveling and trolley slide traveling.
3. End carriage is box girder, and the connection between end carriage and main girder adopt high strength bolt, in order to transport conveniently.
4. Optimize structure design, bearing layout reasonable , bear horizontal force, improve use age of the bearing.
5. The connections of every mechanical part are gears, in order to achieve simple installation and convenient maintenance. The drive wheel group and driven wheel group are all supported on crescent bearing box , convenient for disassembly and adjust.
Technical Parameter
| Capacity | 5-500 |
| span | 10.5-31.5 |
| Work duty | A5-A7 |
| Power supp;y | Three Phrase Alternating Current |
| Lifting Height | 12-15m |
cause this kind of product is customized product,please provide us the detailed information:
1. Lifting capacity.
2. Span length. (rail center to rail center)
3. Lifting height. (hook center to ground)
4. Do you need bus bar, rail from us?
5. Local power supply 380V 50Hz 3P?
6. Working condition: What goods to lift?
7. Drawings of working place would be appreciated.