Double girder gantry crane

Capacity:5~100tonS
Span:10.5-35m
Lifting height"6~16m
Working voltage:380v50hz3ph or customized
Control mode:Pendent line control+remote control+Cabin control
Working class:A5 A6 A7
Temperature:-20'C~40'C
Speed control:resistor or VVVF control


MG Type Twin Girder Goliath Gantry Craneis applied to open air warehouse or railways for loading and unloading as well as lifting work.

Accompanied with particular lifting tools, MG Type Twin Girder Goliath Gantry Crane could be used for container. It has features of beautiful appearance, perfect performance, low cost, easy maintenance, durability and so on.

MG Type Twin Girder Goliath Gantry Crane is widely used in open warehouses, material stocks area, cement plant, granite industry, construction industry, engineering industry, railway station to lifting and loading unloading goods. It also can be used together with other lifting appliance for special purpose. The lifting capacity is 5-100tons; Span is of 10.5-31.5meters.

This machine uses AC frequency converter, PLC control and equipped with intelligent all Chinese "state monitoring control system". It is composed of beams; Crane traveling mechanism adopts separate drive. All mechanism is operated in the operation cabin; Crane power supplies are divided into cable and sliding wire, please choose one of them when you make an order with us.

Working condition:

1. Working temperature: -25-40 ° C
2. Working duty: A5 A6 A7.
A) A5: Used in places of medium service, such as machine and assembly shops.
B) A6: Used in places of frequent working such as metallurgy and casting shops.
C) A7: Used in places of frequent working such as metallurgy and casting shops.
3. Power source: 380V 50Hz 3Phase. And we can design as your demands.
4. The altitude height of site is ought to be less than 2000M.
5. Flammable, explosive and corrosive gas is forbidden in the work environment.
6. The crane is forbidden to lift fuse and blend deleterious article and flammable explosive article.


Feature:

1) Reasonable structure
2) Favorable performance.
3) Smooth starting and stopping
4) Safe and reliable traveling.
5) Low noise, commodious cabin and good view.
6) Convenient maintenance, excellent exchangeability for parts and computers.
7) Saves electricity specifications.

Safety:
Overload protection.
Main lifting motor with thermal protection.
Hooks with latch.
Rubber buffers.
Protective earthing.
Crane switch and travel end switch.
Emergency switch can stop all movement when any dangerous happened.
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.
Design and construction rules:
All the standards which is required for the crane is the Chinese standard.

Painting:
Primer and finishing paint
Color: According to your demands.
Average thickness: About 100 microns.

Customer Care:

Our philosophy is that the customer should be happy with the system performance and enormous improvement in work environment. And our aim is reducing the labor inputs for eternity working together with customer and ensuring that the work is executed to the utmost satisfaction of the customer.

Henan Mine Crane Company concentrate to have positive and flexible approach towards customer need through its comprehensive solution and service capabilities, professionally and cost effectively. As a company whose success derives from mains fully committed to develop close working partnership with its customer.

Welcome to contact us by E-mail or online, you will receive our prompt and careful reply!