Automatic High-Speed Edge Banding Machine
China Automatic High-Speed Edge Banding Machine, Find details about China Automatic Edge Banding Machine, Edge Banding Machine from Automatic High-Speed Edge Banding Machine
Basic Info.
Model NO.
RFB865
Min.length panel
120mm
Min.width panel
60mm
Manufacturing Principles
Glue Tank Underneath
Customized
Customized
Type of Edgeband
PVC, Acrylic, Veneer
in-Put Voltage
380V
in-Put Frequency
50Hz
out-Put Frequency
200Hz
Total Power
21.3kw
Trademark
SAMACH
Transport Package
Wooden Case
Specification
RFB865
Origin
China
HS Code
84659900
Model NO.
RFB865
Min.length panel
120mm
Min.width panel
60mm
Manufacturing Principles
Glue Tank Underneath
Customized
Customized
Type of Edgeband
PVC, Acrylic, Veneer
in-Put Voltage
380V
in-Put Frequency
50Hz
out-Put Frequency
200Hz
Total Power
21.3kw
Trademark
SAMACH
Transport Package
Wooden Case
Specification
RFB865
Origin
China
HS Code
84659900
Product Desciption
Automatic Edge Banding Machine RFB865
1.Pre-milling system
Pre-milling adopts double linear guide, with higher guidance accuracy and good motion stability, pre-cutter Φ125mm H35mm six-tooth diamond pre-milling cutter, with high hardness and wear resistance, longer service life.
2.Feeding and press
Automatic feeding system,Realize edge band feeding by control the press wheels by pneumatic control.
3.Multi-edge band holder
Based on different processing requirements, 2 to 10 different edge bands can be changed automatically. When edge band is used up, the machine will show alarm automatically.
4.Caterpillar type pressure beam
Adopt the double-peak caterpillar pressure with high stability. It has large press contact surface and good pressure positioning effect. The belt contacts with wood piece surface can ensure the good pressure of panels with different lengths.
5. Upper glue box, heat glue quickly, double-cylinder glue pushing system (double glue pot)
6 End trimming system
Double end trimming guide rails, 0.37KW high speed motor(CE),imported linear guide rail
7. Rough/fine trimming system
Rough/fine trimming motor is 0.75kw high frequency motor. The rough trimming tools are the Φ56/Φ69mm four tooth carbide cutters with high hardness and wear resistance. The tools processing angle is 15°.
Optional:High-power high-frequency motor 1.1kw.
8 Corner trimming system
Four-tool high speed tracking, 0.75KW high speed motor.
9 Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle
11 Electric system
Each functional group is controlled by independent Delta inverter to ensure the co-movement of the system (except the buffing and lifting motor).
All electric parts are from famous brand with CE to ensure the long time operation of the machine.
Use the Taiwan DELTA PLC control system to ensure high stability and precision.
12 Control panel
The machine is equipped with DELTA touch screen, the human-computer control surface. The picture and words can directly reflect machine failures and solutions, which makes machine maintenance easier.
13.Pressure beam electric lifting system
The rising and falling function of the pressure beam can be started rapidly through the operation screen. The separate position indicator can show the rising and falling height.
14. Automatic grease lubrication & Automatic oiling:
1.The oil filling structure is controlled by microcomputer and oil filling speed can be defined by the user. The minimum oil amount alarm is set up.
2.The oil filling structure can add oil for the end trimming moving slider and conveyor guider within set-up time. This can ensure the related parts be lubricated in time, reduce friction and prolong the service life.
3.The manual oil filling system for the pre-milling is used for the lubrication of up, down, front and back guide rails to prevent service life and ensure work precision.
15 Air source processor (triplets)
16.CE
18..CE optional component
1) Power break protection device
2) Central power switch
3) Protective casing over press roller
4) CE electrical components
Optional:
1.Misting station
2.Pneumatic Tool Alignment System
1.Input the new thickness of edgeband,then it can change the edgeband automatically.
2.Position location of cylinder,work with 0.4-3mm edgeband.
3.The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands at the entrainment position. Easy to operate.
3.Hot air blowers
Brings high gloss shine back to PVC banding after the 3mm scrape station.
Blow after the scrape station, make buffing effect better.
4.Dust collection manifold for scraping system.
Catch the wast sawdust caused by scraping.Clean and easy.
Parameter
Reasons To Choose SAMACH:
1: Good Resources With No.1 Quality In China
2: Quick Delivery
3: Excellent After-Sale Services
4: 24 Hours Technical Support Through Email Or Calls.
5: Friend Partner Relationship.
Get the maximum return on your investment with Samach's affordable, flexible and user-friendly machines, designed to help you succeed by delivering maximum performance!
1.Pre-milling system
Pre-milling adopts double linear guide, with higher guidance accuracy and good motion stability, pre-cutter Φ125mm H35mm six-tooth diamond pre-milling cutter, with high hardness and wear resistance, longer service life.
2.Feeding and press
Automatic feeding system,Realize edge band feeding by control the press wheels by pneumatic control.
3.Multi-edge band holder
Based on different processing requirements, 2 to 10 different edge bands can be changed automatically. When edge band is used up, the machine will show alarm automatically.
4.Caterpillar type pressure beam
Adopt the double-peak caterpillar pressure with high stability. It has large press contact surface and good pressure positioning effect. The belt contacts with wood piece surface can ensure the good pressure of panels with different lengths.
5. Upper glue box, heat glue quickly, double-cylinder glue pushing system (double glue pot)
6 End trimming system
Double end trimming guide rails, 0.37KW high speed motor(CE),imported linear guide rail
7. Rough/fine trimming system
Rough/fine trimming motor is 0.75kw high frequency motor. The rough trimming tools are the Φ56/Φ69mm four tooth carbide cutters with high hardness and wear resistance. The tools processing angle is 15°.
Optional:High-power high-frequency motor 1.1kw.
8 Corner trimming system
Four-tool high speed tracking, 0.75KW high speed motor.
9 Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle
10.Buffing system:
Pneumatic control, front and back movement, double buffing is optional.11 Electric system
Each functional group is controlled by independent Delta inverter to ensure the co-movement of the system (except the buffing and lifting motor).
All electric parts are from famous brand with CE to ensure the long time operation of the machine.
Use the Taiwan DELTA PLC control system to ensure high stability and precision.
12 Control panel
The machine is equipped with DELTA touch screen, the human-computer control surface. The picture and words can directly reflect machine failures and solutions, which makes machine maintenance easier.
13.Pressure beam electric lifting system
The rising and falling function of the pressure beam can be started rapidly through the operation screen. The separate position indicator can show the rising and falling height.
14. Automatic grease lubrication & Automatic oiling:
1.The oil filling structure is controlled by microcomputer and oil filling speed can be defined by the user. The minimum oil amount alarm is set up.
2.The oil filling structure can add oil for the end trimming moving slider and conveyor guider within set-up time. This can ensure the related parts be lubricated in time, reduce friction and prolong the service life.
3.The manual oil filling system for the pre-milling is used for the lubrication of up, down, front and back guide rails to prevent service life and ensure work precision.
15 Air source processor (triplets)
16.CE
18..CE optional component
1) Power break protection device
2) Central power switch
3) Protective casing over press roller
4) CE electrical components
Optional:
1.Misting station
- Before pre-milling: Prevent the upper and lower surface from sticking with glue, improve the edge banding effect.
2.Pneumatic Tool Alignment System
1.Input the new thickness of edgeband,then it can change the edgeband automatically.
2.Position location of cylinder,work with 0.4-3mm edgeband.
3.The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands at the entrainment position. Easy to operate.
3.Hot air blowers
Brings high gloss shine back to PVC banding after the 3mm scrape station.
Blow after the scrape station, make buffing effect better.
4.Dust collection manifold for scraping system.
Catch the wast sawdust caused by scraping.Clean and easy.
Parameter
| Model | RFB865 |
| Feeding speed | 26-32m/min |
| Thickness of edgeband | 0.4-3mm |
| Thickness of panel | 10-60mm |
| Length of panel | ≥120mm |
| Width of panel | ≥60mm |
| Working pressure | 0.6Mpa |
| Min.board size | 120(L)*120(W)mm |
| Total power | 21.3KW |
| Overall size | 9200*1000*1800mm |
Reasons To Choose SAMACH:
1: Good Resources With No.1 Quality In China
2: Quick Delivery
3: Excellent After-Sale Services
4: 24 Hours Technical Support Through Email Or Calls.
5: Friend Partner Relationship.
Get the maximum return on your investment with Samach's affordable, flexible and user-friendly machines, designed to help you succeed by delivering maximum performance!
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine