Products

PVC Cable Trunk Extruson/ Prouction Line

China PVC Cable Trunk Extruson/ Prouction Line, Find details about China Pvc Cable Trunk Production Line, Pvc Cable Trunk Extrusion Line from PVC Cable Trunk Extruson/ Prouction Line

Engagement System
Full Intermeshing
Screw Channel Structure
Deep Screw
Exhaust
Exhaust
Automation
Automatic
Computerized
Computerized
Production Name
PVC Cable Trunk Extruson/ Prouction Line
Trademark
Sino-tech
Transport Package
Wooden Case
Specification
CE, ISO
Origin
China
HS Code
84772090
Engagement System
Full Intermeshing
Screw Channel Structure
Deep Screw
Exhaust
Exhaust
Automation
Automatic
Computerized
Computerized
Production Name
PVC Cable Trunk Extruson/ Prouction Line
Trademark
Sino-tech
Transport Package
Wooden Case
Specification
CE, ISO
Origin
China
HS Code
84772090
PVC cable trunk/trunking profile extrusion production line
1. Our company is cooperating with many universities to develop the urgently needed plastic machine. It also absorbs advanced technology from abroad to achieve the purpose of supplying complete machine and technology.

2. PVC edge band machine
3. The PVC edgeband Extrusion Line is used for extruding PVC edgeband. The edgeband in the form of roll has its thickness of 0.5-4.0 mm and width of 5-300mm depending on the requirments. Its length is not limited. This product is featured by its good banding effect, easy operation and high utilization rate, therefore it is applicable to mechanical banding of solid furniture, composite doors and WPC doors.
ItemTechnical parameter
I. SJ65/25 Single Screw Extruder
Supplier of electric control cabinetMain transducer and feeder' s transducer: Hitachi transducer; Air switch
Output capacity80kg/h(approximate)
Inlet wire terminal of power source3-phase, 4-wire system
Motor powerMain motor: AC30kw
Temperature control curve typeTemperature fluctuating self-adjustment(PID type)
Temperature control meters, manometers and speedometersRKC(Japan) temperature control system, Xiaogan Wuyue(China) sensor and high quality speedometers respectively.
Pressure displayWith melt pressure display
Feeder typeVacuum feeder(with drier), with enganced screw feeder
Connection of die head with flangeBy bolts
The advantages over other companies in this fieldGood shearing, high output, reasonable design, high accuracy and easy control, high-grade materials and parts with steadfast performance.
  
1. Screw 
Diameter65mm
LD25: 1
Quantity1pcs
With gas vent or notWith
  
2. Barrel 
Barrel typeInteger
Heating methodAir cooling unit. Special stainless cover and red copper electricity heater are used on the barrel
Heating zones7-zone
Total heating power60kw(approximate)
Temperature range50~300
Cooling zones7-zone
Cooling system7X0.55kw
Cooling mediumAir cooling
Screw and barrel manufacturerZhejiang Machinery Co., Ltd
Quality guaranteeTesting block and tested report are available. Guaranteed period is more than 10, 000 working hours
Nitrid depth0.6~0.7mm
3. Driving system and speed reducing system
Main driving motor power18.5kw
Main motor working method3-phase asynchronous motor, connected to the gearbox by couple
Main motor rotating speed 
Gearbox typeHelical gear, hardened
GearsCarburized and ground; The material is 20CrMoTi
Main motor speed-adjusting methodAC transducer
  
II. Haul-off unit
Haul-off speed20-30m/min(adjustable)
Speed control methodInverter
Motor power0.75kwX2
  
III. Single disc winder
Winding range15-25mm
  
IV. Mould1 set

Any question,please call me. 
MOB&waspp: +8613773240086
 

You Might Also Like