Double-tube Carbon steel UV lamp trolley
Products DescriptionDouble-tube Carbon steel UV lamp trolley, has two pcs of 30 watts UV lamps that emit a high intensity ultraviolet light that hits every surface in the room and kills any micro organisms or pathogen including MRSA,hand foot mouth disease,colds and flu,pneumonia,molds,e.coli,salmonella and similar type bacteria.The light penetrates and destroys the actual DNA of micro organisms. There is no known micro organism that is immune to UV-C energy. High Intensity UVC Lamp disinfects approximately up to 30 square meters room area. There are numerous safety features bulit with a 0-120mins timer. High Intensity UVC Lamp has numerous applications not just for hospitals but can be used in schools,play areas,hotels,clinics,homes,cinemas, buildings,food manufacturing companies and offices. it quickly and effectively provide disinfection of all surfaces and air within minutes. High Intensity UVC Lamp is laboratory tested ,used by hospitals and recommended by doctors.
Technical Data
This product is made of carbon steel,with its double-tube structures, but also can be used independently.
Tube Power | ≥30W×2 |
Number of tubes | 2 |
Applicable static area | ≥30m2 |
Voltage/Frequency | 220V±10%/50Hz±10% |
Irradiance | ≥214uw/cm2 |
Movable and foldable, the tube could be Concealed inside, can be adjusted to various angles | 30°, 60°, 90°, 135°, 180° |
A timer equipment with the time limitation | 0-120 mins
|
Method of Usage
1.Install the base with body. 2.Open the protection door. 3.Lift the lamp arm and adjust to 90,135,180 degrees. 4.Insert the plug and press 'ON' button ,adjust 0-120mins timer. 5.Leave the room right now. 6.After finishing sterilization,press 'OFF' button. 7.Adjust timer to 'stop'. 8.Hold down the 'adjustable button' to adjust lamp arm to the box . 9.Close the protection door. 10.Pull out the plug.