Products

Epoxy Foam Sheet Heat to Expand for Irregular Filling

China Epoxy Foam Sheet Heat to Expand for Irregular Filling, Find details about China Epoxy Foam, Expandable from Epoxy Foam Sheet Heat to Expand for Irregular Filling

Model NO.
s50
Density
500g Per Sqm
Trademark
SELVA
Transport Package
Sheet/Carton
Specification
0.5*0.8
Origin
China
HS Code
3506912000
Model NO.
s50
Density
500g Per Sqm
Trademark
SELVA
Transport Package
Sheet/Carton
Specification
0.5*0.8
Origin
China
HS Code
3506912000
Please contact us freely if need the technical data sheet.
 
Super Foaming Epoxy Sheet S50 
 
S50 is an elastomer reinforced epoxy resin based ultra high times foam, the starting 
temperature is 100ºC, 150ºC maximum, the density can be as low as 40 kg/m3, isotropic, 
good adhesion with epoxy prepreg interface, no need to brush glue or adhesive, instead of 
PU foam can effectively improve the rear section of the coating bulging problem. It is mainly 
used for preformed high closed cell rate foam core material, used for carbon fiber products 
secondary molding handle, knife wheel, disc wheel, paddle, hydrofoil, unmanned aerial 
vehicle and other special-shaped parts. 
 

Epoxy Foam Sheet Heat to Expand for Irregular Filling
Usage: the mold is preheated to 60-80ºC, the mold is coated with release agent, and the foam 
is sliced into the mold. The slices need to be spread to all parts of the mold. Where the mold 
cavity is thick, more materials need to be added, the mold is locked, and the mold is pressed 
at 150ºC for 5~15min. Cooling to 80ºC mold, paste carbon cloth secondary molding, above 
120ºC will expand, provide expansion force, secondary mold still need to cool to 80ºC mold, 
coating temperature should not exceed 100ºC. 
 
Storage condition: can be stored at 25ºC for 3 months. The shelf life below 5ºC is 12 months. 

LAB TEST EQUIPMENT

Epoxy Foam Sheet Heat to Expand for Irregular Filling
Epoxy Foam Sheet Heat to Expand for Irregular Filling

You Might Also Like