Industry Foundry Grade Bentonite Powder, Organo Bentonite Oil Drilling
China Industry Foundry Grade Bentonite Powder, Organo Bentonite Oil Drilling, Find details about China Bentonite, Organic Bentonite from Industry Foundry Grade Bentonite Powder, Organo Bentonite Oil Drilling
Basic Info.
Model NO.
HL-08C
Dry Powder Fineness (-200 Mesh)
More Than or Equal to 95.0
Viscosity
More Than or Equal to 2.5
Trademark
Helenbo
Transport Package
Brown Paper Bag
Specification
Organic modified bentonite
Origin
Anhui, China
HS Code
382499
Model NO.
HL-08C
Dry Powder Fineness (-200 Mesh)
More Than or Equal to 95.0
Viscosity
More Than or Equal to 2.5
Trademark
Helenbo
Transport Package
Brown Paper Bag
Specification
Organic modified bentonite
Origin
Anhui, China
HS Code
382499
Product Desciption
HL-08C Product Introduction
HL-08C organic bentonite is a high purity montmorillonite modified by organic cations ,which is hydrophobic and oil-affinity rheological additive.
It is suitable for low and medium polarity coatings, i.e. aliphatic hydrocarbons and aromatic hydrocarbons. It has a high cost performance for low and medium polarity coatings.
Product Features
Application
Oil-drilling fluids
Industrial anticorrosive coating
Architectural coating
Industrial coating
Wood primer
Printing ink
Other systems such as unsaturated polyester system
Main characteristics
Effective provision of viscosity at low shear in the system
Good thixotropic properties
Preventing Pigment and Filler Settlement during Storage
It can prevent the layering of coatings and the precipitation of supernatant liquor
Good batch stability
Higher cost performance
Usage and dosage
It is suggested that it should be added in the grinding stage. The specific production process is as follows:
Prerequisites: high-speed dispersion
Methanol/water(95/5) 30%-35%
Ethanol/water(95/5) 30%-40%
Propylene carbonate(95/5) 40%-50%
It is suggested to use polar activated carbon containing 5% water to achieve the best activation effect.
HL-08C prepared pregel can get the best performance under full dispersion. It is suggested that HL-08C should be added to solvent-based coatings under the condition of high speed dispersion, and the best anti-sagging and anti-sinking effect can be obtained after full activation.
HL-08C can also be added directly in the process of using. After high-speed dispersion, the best anti-sagging and anti-sinking effect can be obtained.
Dosage
The amount of HL-08C added depends on the type of organic, the degree of thickening and other rheological properties.
The use of HL-08C is 0.2%-2.5% of the weight ratio of the whole system. The optimum dosage must be determined through the experimental process.
Efficient dispersing equipment and technology can better optimize the performance of HL-08C, reduce the effect of usage, and achieve maximum economic benefits.
Accurate dosage should be determined in order to obtain the best effect.
Factory
Equipment
Exhibition
HELENBO FAQ
1)Are you the factory or the trading company?
We are the factory.For more information,pls visit our website:http://hlb-organobentonite.en.made-in-china.com
2)What' the payment terms:
a.30% deposit before production,70% balance money before shippment by TT
b.100% T/T
c.L/C at sight
d.Western Union
3) How about the delivery time:
7 days according to the different quantity.
4) How about the sample?
Pay by customer.
5) How about the customer's own logo?
We can produce according to customer's requirement.
6) When will the customer receive our reply.
We will reply you within 24 hours
7) What's our company's advantage?
We are the professional factory of organic bentonite.Competitive price,Best quality,Quick delivery time and Best service.
HL-08C organic bentonite is a high purity montmorillonite modified by organic cations ,which is hydrophobic and oil-affinity rheological additive.
It is suitable for low and medium polarity coatings, i.e. aliphatic hydrocarbons and aromatic hydrocarbons. It has a high cost performance for low and medium polarity coatings.
Product Features
| Composition | Organically modified bentonite |
| Exterior | Milky white to grey white powder |
| Moisture content (%) | ≤3.50 |
| Fineness (-200 mesh) | ≥95.0 |
| Viscosity | ≥2.5 |
Application
Oil-drilling fluids
Industrial anticorrosive coating
Architectural coating
Industrial coating
Wood primer
Printing ink
Other systems such as unsaturated polyester system
Main characteristics
Effective provision of viscosity at low shear in the system
Good thixotropic properties
Preventing Pigment and Filler Settlement during Storage
It can prevent the layering of coatings and the precipitation of supernatant liquor
Good batch stability
Higher cost performance
Usage and dosage
It is suggested that it should be added in the grinding stage. The specific production process is as follows:
Prerequisites: high-speed dispersion
- Resin/solvent (Pre mixing)
- HL-08C Organic Bentonite(high-speed dispersion for 10 minutes)
- Polar activator(high-speed dispersion for 5-10 minutes)
- Surface active agent(If it exists)
- Pigments(Grinding to required fineness)
- Paint correction
Methanol/water(95/5) 30%-35%
Ethanol/water(95/5) 30%-40%
Propylene carbonate(95/5) 40%-50%
It is suggested to use polar activated carbon containing 5% water to achieve the best activation effect.
HL-08C prepared pregel can get the best performance under full dispersion. It is suggested that HL-08C should be added to solvent-based coatings under the condition of high speed dispersion, and the best anti-sagging and anti-sinking effect can be obtained after full activation.
HL-08C can also be added directly in the process of using. After high-speed dispersion, the best anti-sagging and anti-sinking effect can be obtained.
Dosage
The amount of HL-08C added depends on the type of organic, the degree of thickening and other rheological properties.
The use of HL-08C is 0.2%-2.5% of the weight ratio of the whole system. The optimum dosage must be determined through the experimental process.
Efficient dispersing equipment and technology can better optimize the performance of HL-08C, reduce the effect of usage, and achieve maximum economic benefits.
Accurate dosage should be determined in order to obtain the best effect.
Factory
Equipment
Exhibition
HELENBO FAQ
1)Are you the factory or the trading company?
We are the factory.For more information,pls visit our website:http://hlb-organobentonite.en.made-in-china.com
2)What' the payment terms:
a.30% deposit before production,70% balance money before shippment by TT
b.100% T/T
c.L/C at sight
d.Western Union
3) How about the delivery time:
7 days according to the different quantity.
4) How about the sample?
Pay by customer.
5) How about the customer's own logo?
We can produce according to customer's requirement.
6) When will the customer receive our reply.
We will reply you within 24 hours
7) What's our company's advantage?
We are the professional factory of organic bentonite.Competitive price,Best quality,Quick delivery time and Best service.
You Might Also Like
ANSI B16.9 Pipe Fitting Carbon Steel Concentric Reducer
LED 18W Linear Lamp Batten pendant Light
Wholesale S195 S1100 S1105 S1110 S1115 S1125 S1130 Single Cy......
Enamel Steel Biogas Digester Anaerobic Reactor Plant
Ca6140 Universal Metal Cutting Turning Engine Horizontal Man......
Forklift Truck 3.5 Ton Diesel on Sale
Kejie Wall Mounted Rechargeable Emergency Light
API Certified Xj550 Truck-Mounted Drilling Rig and Mobile Wo......
Zm01 Mini Mobile Thermal Receipt Printer Pocket WiFi Bill PO......
Household Stainless Steel and ABS Fruit and Vegetable Slicer