Control Card Readers  Wiegand 26 rf gate access control card rfid reader 125khz

D101A 2 to 10 cm short range 125 KHz reader with wiegand 26, wiegand 34 protocol 

Optional Model: 

D101A-26/34, (Black Color, wiegand 26/34 interface)
 

Specification 

*Wiegand 26bits/ Wiegand34bits Standard Format Data Output 

*Less than 0.2 second Response Speed 

*5-10cm Proximity Range 

*Ambient Temperature:-25ºC to 75ºC 

*Ambient Humidity: 10%-90% 

*Built-in Antenna 

*Built-in LED (Double Color LED) 

*Built-in Loud Speaker (Buzzer) 

*DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current 

*100 Meters Communication Distance 

*Real Time Data Transfer 

*With Water-Proof Function 

*Audiovisual indication: When a registered card is presented to the reader, the re 

LED flashes green and the beep sounds. 

*102*43*16(mm) 
 

Package:

1 * RFID reader

1* User manual l

1* Gift box 

Installation Description

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red DC 9V to 16V

Black GND

Green D0

White D1

Yellow BEEP

Blue   LED

Grey  Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

RFID READER PHOTO