China Iwildt an-9000ctl Spiral CT Security Inspection Machinespiral CT Security Inspection Machine, Find details about China Iwildt an-9000ctl, Spiral CT Security from Iwildt an-9000ctl Spiral CT Security Inspection Machinespiral CT Security Inspection Machine
IWILDT AN-9000CTL Spiral CT security inspection machine
Spiral CT security inspection machine
Product introduction
IWILDT ™ AN-9000CTL spiral tomography CT security inspection machine is a security inspection system with 360 degree image three-dimensional data acquisition effect. The trunk package is placed on the conveyor. Through the detection frame of circular spiral CT detection technology, a circle of circular image data is collected in 3MS. After n times of circular image data are processed by computer, three-dimensional three-dimensional images are generated and CT slice images of all faults are obtained.
IWILDT ™ AN-9000CTL spiral tomography CT security inspection machine has high-speed and low-speed scanning working modes, which is suitable for application scenarios with harsh safety level. It can visually observe the top scanning diagram / bottom scanning diagram / side scanning diagram / tomography diagram / multi angle analysis diagram of luggage package.
IWILDT ™ AN-9000CTL spiral tomography CT security inspection machine is suitable for customs, ports, high-speed railway stations, subway stations, passenger stations, postal express, military bases, border ports and other places. Generate the three-dimensional image of the items in the luggage package through X-ray fluoroscopy scanning, analyze its material, volume and quantity, and check whether there are threats such as dangerous chemicals and contraband.
IWILDT ™ AN-9000CTL spiral tomography CT security inspection machine adopts 260kv ray source and steel plate with penetration force up to 45mm. In the high-speed scanning mode, up to 1200 luggage bags can be checked every hour, and in the low-speed scanning mode, up to 300 luggage bags can be checked every hour.
IWILDT ™ AN-9000CTL X-ray array image detection and imaging system of an-9000ctl spiral tomography CT security inspection machine has a high-speed image data acquisition circuit of up to 2.5 meters per second. After the data is processed by computer software, the different densities and shapes of the packed articles in the luggage compartment are displayed layer by layer according to the pseudo color gray level. The operator can quickly and reliably check and analyze images through the high-resolution IPS LCD monitor.
IWILDT ™ AN-9000CTL spiral tomography CT security inspection machine can realize the functions of unattended machine vision high-speed map judgment and automatic sorting of luggage bags. It has small floor area and low requirements for external infrastructure, and can meet the most stringent international safety inspection standards.
Product parameters
Ray device
Ray energy: 260kv;
Scanning mode: spiral tomography;
Training management mode: automatic power-off recording dual-mode soft start;
Power control: undervoltage, overvoltage and overcurrent protection;
Emergency stop interlocking: safety protection interlocking device. Once the interlocking device is disconnected, X-ray emission shall be stopped immediately.
Penetrating steel plate: 45mm thick steel plate;
Heat dissipation mode: oil immersed;
Radiation protection: 6mm thick lead plate;
X-ray leakage rate (5cm on the outer surface): 0.5 μ sv/h
Scattering angle: 80 degrees;
Control mode: full duplex RS232 communication code control;
Collimator: ultra narrow seam conical beam;
detection system
Structural design: C-shaped detection frame;
Color coating: White / gray / police blue;
Appearance dimension: 3800mm (L) x 1400(W) x 1700mm ( H) ;
Channel size: rectangular, with maximum width of 650mm and maximum height of 500mm;
Height of conveyor belt: 702mm;
Equipment weight: 2000kg;
Detection crystal: GSI;
Photoelectric conversion: CMOS;
Pixel spacing: 1.575;
Pixel arrangement: C-shaped line array;
Cascade mode: network port RJ45 communication mode;
Noise (1m from the outer surface): ≤ 65dB
image processing
Image workstation: i7 / 8g / 4tb hard disk / 24 inch 20000:1 / LED IPS high gray highlight display;
Software function: Chinese / English operation interface, which can carry out edge enhancement and sharpening, image inversion, histogram equalization, stored image back check, color / black and white, local increase, over increase, organic matter removal / inorganic matter removal, single display, brightening / darkening, zoom in / out, three-dimensional marking, three-dimensional measurement 3D cutting and other processing can be rotated arbitrarily to view the internal image of the object from different angles, real-time video and real-time self diagnosis function. In case of fault, the fault code will be automatically displayed on the screen (which can be found in the operation manual), the equipment will be automatically trained and managed, the hierarchical management authority can be set, and the historical files can be searched every day, week, month, quarter Automatic generation of annual data report;
Image format: JPG image is named according to the scanning time and can be output through the USB interface of the device;
Intelligent identification: identification and comparison of ID cards and image classification and archiving. Explosives, drugs, thin-film drugs, nitrobenzene and other explosive raw materials are marked with contraband by means of image circle selection and text description, and automatic alarm is given;
Data storage: 500000 images are the standard (when the storage is full, the early stored images will be automatically cleared), including: the monitored image of the inspected article and the identification number generated at the same time, inspection results, historical time, operator ID, airport baggage barcode, etc.
Image algorithm: 3D reconstruction, system correction algorithm, iterative reconstruction, cone beam artifact correction method, CNN neurotic network identification algorithm such as hazardous and chemical products, conveyor speed control, energy spectrum imaging algorithm, etc. the software system is upgraded at the console layer, and the operation status of the device is monitored in real time through the remote operation and maintenance system.
3D tip function: the system has the function of inserting virtual dangerous goods into three-dimensional images (tip function), which can randomly insert the three-dimensional images of virtual controlled tool dangerous goods into the normal three-dimensional detection image, so as to investigate the identification ability of dangerous goods.
Equipment performance
Scanning mode: spiral tomography;
Passing rate: 700bph;
Channel size: width 620mm, height 420mm;
Conveyor belt load (evenly distributed): 160kg
Conveyor belt speed: 0.2m/s
Leakage dose: 0.5 μ SV / h (5cm away from the shell);
Dr wire resolution: 40awg;
Dr penetration: 45mm steel plate;
Dr spatial resolution: 1mm line pair;
CT spatial resolution: 2.5lp/cm;
Working time of the whole machine: 24-hour continuous operation;
Operating temperature: - 20 ° C to + 53°C ;
Storage temperature: - 30 ° C to + 55°C;
Relative humidity: up to 95%;
Waterproof grade: IP45;
Diagnosis function: real-time self diagnosis of machine fault, automatic prompt of fault type on the screen and display with code.
Power consumption: average 3.2 kW;
Monitoring: face recognition camera + stereo power amplifier sound;
Identification: 4 radiation labels, 1 high voltage hazard, 2 power signals;
Warning: three color safety light (system and ray status indicator) + siren. In case of emergency, press the red emergency stop switch to stop all actions of the equipment;
Standards: meet the requirements of national technical code for safety of electrical equipment (GB 19517-2009), equipment safety radiation system meets the requirements of health protection standard for X-ray baggage inspection system (gbz127-2002) and basic standard for ionizing radiation protection and radiation source safety (GB18871-2002), and meets the requirements of World Health Organization and ICRP 103-2007, Chinese, EU and US regulations;
Why choose Wuhan Aiwei Technology Co., Ltd. ?
1.National high-tech enterprises
2.Wuhan famous brand products
3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
Abous Us:
Trade show
Enterprise honor certificate:
FAQ
Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.
Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.
Q3: What is your leadtime?
A: 3-7 working days after received the payment.
Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.
Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.