1. ISO 5658-2 : Reaction to fire tests -Spread of flame - Part 2 Lateral spread on building products in vertical configuration
2. IMO Resolution A. 653(16): Recommendation on fire test procedures for flammability of bulkhead, ceiling and deck finish materials
3. ASTM E 1317 : Standard test method for flammability of marine surface finishes

1. The test instrument consists of four main components: one set of radiant plate supports and one set of sample supports. At the same time, they are connected together to make the test sample form the required structure together with radiant plate, sample rack and ignition burner.

2. The radiant plate is provided with a radiant surface of about 480 mm X 280 mm, and the front of the radiant surface is provided with a wire mesh screen to increase the radiation;

3. Adopt blower to provide radiant plate air source, and adopt frequency converter to adjust;

4. The propane mass flow controller is used to regulate the gas source, and the venturi mixer is used to mix with the air to provide the combustion gas source required by the radiant plate;

5. Provide porous calibration plate and sliding heat flow meter moving track to detect whether the heat radiation flux meets the standard requirements;

6. Water-cooled heat radiation flux sensor for measuring heat radiation flux curve of radiant plate;

7. Portable water cooling cycle device can take away the surface heat of the heat meter;

8. Ceramic tube burner, which can directly expose flame to test sample surface;

9. Rotor flowmeter is adopted to regulate the mixed combustion gas of ceramic tube burner;

10. Mass flow controller, which can easily measure the heat of methane by measuring the critical heat flux;

11. According to IMO test standards, thermocouple devices can be provided to measure heat release rate and other related parameters;

12. Methane calibration burner and methane mass flow controller can provide 1KW and 3KW flame temperature;

13. During the test, the camera can observe and save the measured state in the program;

14. Equipped with an Angle adjustable observation mirror, the flame spreading rate can be observed through the glass mirror and sample rake during the test, and can be automatically recorded by foot switch;

15. Computer and standard test software to control the test process.
Application:
Rail
Shipping Material
Other

1. Rail for easily measuring heat flux of radiant panel at an interval of 50mm. 
2. IMO Program to facilitate all calibrations and tests as well as to printout of results by standards (IMO, ISO). 
3. Radiant panel temperature controller: Equipment to prevent flame back toward the back side of Radiant panel, check the internal temperature of radiant panel and automatically block gas sol. v/v in case of flame back-flow. 
4. MFC (Mass Flow Controller) to easily measure the heat amount of methane gas in measuring critical heat flux. 
5. Explosion-proof options of all control systems for safety in combustion in radiant panel as well as Check-Valve and its gas shut-off valve (Solenoid Valve) to prevent back-flow in gas line. 
6. Camcorder to observe and save test conditions in a program during tests. 

7. No.	Parameters	Specifications
   7	Exhaust	0.01 /s
   8	Size	1650*810*1985mm
   9	Weight	300kg
   10	Power supply	220 V AC, 60 Hz, 10 A
   11	Gas source	Propane Gas, Methane Gas, Acetylene Gas, Compressed Air