China Car Spray Booth with Fully Undershoot-Type, Find details about China Paint Booth, Car Spray Booth from Car Spray Booth with Fully Undershoot-Type
Outside Dimension (mm) | 7006*6056*3450(L*W*H) | Inside Dimension(mm) | 6900 * 4000 * 2650(L*W*H) |
Front Door(mm) | 3000*2600 (W*H) | Service door (mm) | 1800*650( W*H) |
Total Power | 17KW | ||
Cabin system | Wall panel | 50mmEPS panel, steel sheet thickness: 0.6mm | |
Ceiling panel | Galvanized steel sheet. | ||
Basement | 300mm depth, middle with grids, two side with checkered plates. | ||
Ramp | three pieces 2000*900mm ramps | ||
Glass | 6mm toughened glass | ||
Windows | Square glass windows | ||
Air Make-up System | Air Inlet fan system | 1 * 7.5kw Belt-drive fan, proof-explosion motor, Ex rated | |
Exhausted fan system | 1 * 7.5kw Belt-drive fan, proof-explosion motor, Ex rated | ||
Ai capacity | 25000m3/h | ||
Air Flowing speed | 0.3m/s in empty booth | ||
Air Control method | One manual damper for air exhausted system | ||
Exhausted ducting | 4 meters air duct and one flop damper | ||
Purification System | Pre-filter | G3 grade | |
Ceiling filter | EU5 / F5 | ||
Floor filter | green fiber glass filter / G3 grade | ||
Exhausted fan Filters | M green fiber glass filter. | ||
Heating System | Heat Exchanger | SUS304 material, argon arc welding. | |
Heating burner: | Riello G20 diesel oil burner(gas burner for option) | ||
Heating productivity | 180000Kcal/h | ||
Spray to baking switch | 20N BELIMO brand electrical damper | ||
Chimney ducting | 3 meters stainless ducting and one chimney elbow | ||
Max heating temperature | 80degrees | ||
Heating time | 4-6min(20-60degrees) | ||
fuel consumption | 5-6L /vehicle | ||
Lighting System | Ceiling lights | 8 Units, each 4 x 36W lamps, Total 1152 W | |
Side lights | 8 Units, each 4 x 20W lamps, Total 800 W | ||
Illumination | 1200LUX | ||
Controlling system | Switched control panel | Spraying & baking switch, lighting switch, emergency stop, breakdown alarm, failure alarm, pressure gauge |
Q: Which Port of loading?
A: Mainly ship from Ningbo port / Shanghai Port/Guangzhou Port.
Q: What is your MOQ?
A: All the products can be mixed in one container with low MOQ 1pcs.
Q: What is the Lead Time?
A: Normally it needs 20-25 days.
Q: What is the Payment Terms?
A: T/T/ 30% deposit before production and 70% before delivery.