Major configuration
1. Machine should have one unwind and one rewind
2. Low speed and full load startup; stable running by tension control when increasing and decreasing speed; noise is decreased
3. High speed under mesh points reappearances rate high, the screen prints each level clearly demarcated, stereoscopic effect strong, the process plate is accurate
4. Uses specially makes the modulus angular gear transmission the printing size accurately, the printing specification is complete (5mm is a specification)
5. Is equipped with the convulsion to catch a chill gives off heat two sets of equipments, the grouping control has the cold wind to finalize the installment in addition
6. The operation is easier and more convenient, the register is more accurate, and the lifespan is also longer
7. Inking motor can be stopped and started antomatically when lifting the printing plate system
8. The type of providing the ink is smearing the ink with plastic roller and anilox roller
9. The specially-made vertical gear transmission which present the accurate printing size
10. Fix with the blower and the heater including the heater employing the central constant temperate controlling system
11. The grouped and controlled bottom roller processed with Germany particular steel materials processed with special techniques and electrically gilded with 0.1mm hard chromium protective layers
12. Aluminum alloy wheels are hard oxidized and processed with dynamic and static balancing
13. Material holder use air shaft
14. Vapor tension to auto heave material
15. Auto tension control
16. Use the PLC programmable control
17. Touch screen interface to operate
18. Pneumatic hydraulic pressure auto deviation correction system
19. Surface rewind with web unload by pneumatic pushing bar
20.1 set of printing cylinder, sizes: 15 inches.
21. Able to print 4 colors pictures CMYK.
Acceptable printing material
LDPE: 28 ~ 100μm HDPE: 30 ~ 100μm LLDPE: 25 ~ 100μm
PVC: 25 ~ 70μm CPP: 20 ~ 60μm PP: 23 ~ 65μm
NY: 20 ~ 50μm PET: 12 ~ 60μm OPP: 18 ~ 70μm
BOPP: 17 ~ 60μm OPA: 20 ~ 60μm Plating film: 30 ~ 80μm
Aluminum: 25 ~ 80μm Cellophane: 30 ~ 150g/m2 Paper: 40 ~ 300g/m2
Printing Samples:
| Major performance and configuration |
| Printing color | 6color | |
| Printing width | 1150mm | |
| Web path width | 1200mm | |
| Printing length (repeat) | 190 ~ 850mm (7.5"~ 34") | |
| Highest machine speed | 110 meters/per minute | |
| Highest printing speed | 100 meters/per minute | |
| Plate thickness | 1.7mm/2.28mm | |
| Ceramic Anilox roller | 200LPI 1PCS,300LPI 1PCS 350LPI 1PCS 600LPI 3PCS | |
| Register precision | Longitude ±0.10mm
Transverse ±0.10mm | |
| Unwind reel diameter | Φ1200mm | |
| Rewind reel diameter | Φ1200mm | |
| Tension scope | 3 ~ 50kg
| |
| Tension precision | ±0.2kg (TC818) | |
| Unwind and rewind web cylinder | Φ76mm (inner diameter) | |
| Unwind and rewind material holder | Air shaft | |
| Air supply | 0.6mpa | |
| Doctor blade | One side enclosed type | |
| Inking | Auto cyclic system, one diaphragm pump | |
| Inking distributing | deceleration motor (reduction ratio 1 : 50) | |
| Drying model | Electric heating /Infrared(hot air) | |
| Drying power | 24kw | |
| Air blower (large) | 1.5kw /3 pcs | |
| Air blower (small) | 180w / 10 pcs | |
| Master motor power | 7.5kw (reduction ratio 1 : 5) | |
| Machine power | 42kw | |
| Outline size | 6.8m×2.35m×3.4m | |
| Deviation correction system | Auto hydraulic pressure | |
| Printing plate lifting system | Auto hydraulic pressure | China |
| PLC | | Taiwan |
| Touch screen | | Taiwan |
| Tension control | | TC818 |
| Conventional bearing | | Japan
|
| Unidirectional bearing | | Germany |
| Frequency conversion controller | | Japan |
| Power: | 220/380/420/460Voltage 3 phase and 50/60 hertz | |