Major Configuration:
1. Machine should have one unwind and one rewind
2. Low speed and full load startup; stable running by tension control when increasing and decreasing speed , noise is decreased
3. High dots presentation rate under high speed; clear and vivid stratification of screen printing; strong stereo effect and accurate registering
4. Aluminum roller adopts the Japan semi-sealing small bearing; flinty oxidation, static and dynamic balancing treatments are conducted; low resistance and small flop
5.The special made modulus angular gears adopted; accurate printing size and full printing specifications (5mm is a spec)
6. With the air exhaust, blowing and heating settings; the heating system adopts the central thermostatic control system and group management, also with the cold air forming devices.7.Printing rolls should keep moving while machine halted
8.Material holder use air shaft
9.Chamber doctor blade system with ink container and circulating pump10.The specially-made vertical gear transmission which present the accurate printing size
11.Fix with the blower and the heater including the heater employing the central constant temperate controlling system
12.The grouped and controlled bottom roller processed with Germany particular steel materials processed with special techniques and electrically gilded with 0.1mm hard chromium protective layers
13.Auto tension control
14.Unwind with auto deviation correction system (EPC)
15.EDGE position contron
16.Reversible printing 6 color press for6+0, 1+5, 2+4, 3+3.
17.1 set of printing cylinder, sizes:381mm
18.Able to print 4 colors pictures CMYK.Acceptable Printing Material:LDPE : 28 ~ 100μm
HDPE : 25 ~ 100μm
Aluminum : 15 ~ 80μm
PVC : 25 ~ 200μm
CPP : 20 ~ 60μm
PP : 23 ~ 65μm
NY : 20 ~ 50μm
PETP : 16 ~ 60μm
OPP : 18 ~ 70μm
BOPP : 17 ~ 60μm
OPA: 20 ~ 60μm
Plating film : 30 ~ 80μm
Cellophane : 30 ~ 150g/m2
Paper : 30 ~ 150g/m2
Wrapping paper : 30 ~ 150g/m2
Printing Samples:
Major performance and configuration
|
| Printing color | 6 color |
| Printing width | 1000mm |
| Web path width | 1050mm |
| Printing length (repeat) | 190 ~ 1016mm (7.5" ~ 40" ) |
| Highest machine speed | 100 meters/per minute |
| Highest printing speed | 80 meters/per minute |
| Plate thickness | 1.7mm/2.28mm |
| Anilox roller | 800LPI 4PCS
250 LPI 1PCS |
| Register precision | Longitude ± 0.15m
Transverse ± 0.15m |
| Unwind reel diameter | Φ 600mm |
| Rewind reel diameter | Φ 600mm |
| Tension scope | 3 ~ 50kg |
| Tension precision | ± 0.3kg |
| Unwind and rewind web cylinder | Φ 76mm (inner diameter) |
| Unwind and rewind material holder | Air shaft |
| Air supply | 0.6mpa |
| Press power | Mechanic control |
| Doctor blade | Two side enclosed type |
| Inking | Auto cyclic system |
| Inking distributing | deceleration motor (reduction ratio 1: 50) |
| Drying model | Electric heating /Infrared(hot air) |
| Drying power | 25KW |
| Air blower (large) | 1.1kw / 2 pcs |
| Air blower (small) | 180w / 6 pcs |
| Master motor power | 5.5(reduction ratio 1: 5) |
| Machine power | 32KW |
| Outline size | 4.8m× 2.2m× 3.2 |
| Deviation correction system | Auto hydraulic pressure China |
| Printing plate lifting system | Auto hydraulic pressure China |
| PLC | Taiwan |
| Touch screen | Taiwan |
| Tension control | Japan |
| Conventional bearing | Japan |
| Unidirectional bearing | Germany |
| Frequency conversion controller | Japan |
| Power: | According to customer' s requirement |