Corten Steel Panel Sheet Side Panel Top Panel Front End Panel

China Corten Steel Panel Sheet Side Panel Top Panel Front End Panel, Find details about China ASTM A242 Corten Steel Plate, ASTM A588 Corten Steel Plate from Corten Steel Panel Sheet Side Panel Top Panel Front End Panel

Model NO.
Corten A/B/ Spa-h / B480 / ASTM A242 A588
Special Use
Weather Resistant
Stock
Stock
Brand
Tisco, Baosteel, Wugang, Angang Steel, Shougang St
Trademark
TISCO, Baosteel
Transport Package
Standard Export Package or as Required
Specification
TK0.6-80mm Width100-2000mm
Origin
Shanxi or Shanghai
HS Code
722540
Model NO.
Corten A/B/ Spa-h / B480 / ASTM A242 A588
Special Use
Weather Resistant
Stock
Stock
Brand
Tisco, Baosteel, Wugang, Angang Steel, Shougang St
Trademark
TISCO, Baosteel
Transport Package
Standard Export Package or as Required
Specification
TK0.6-80mm Width100-2000mm
Origin
Shanxi or Shanghai
HS Code
722540
Corten steel panel sheet Side panel Top panel Front end panel

Corten steel, also called Weather Resistant steel or Atmospheric Corrosion Resistant steel, it is known as a low cost and highly effective material.

Corten steel is classed as being a "self -protecting "steel for its "patina "which results from protective surface oxidation and develops during exposure to the atmosphere; The oxide layer that gives the steel its distinctive appearance and enhances weather resistant capabilities compared to standard steels, also the improved corrosion performance can lead to improved service life. 

The charcteristic for this steel: The surface will be rusted after somedays, but need to take some time around 3 Month; Also if you want it to be rusted very fast based on building requirement, we can do the rust processing too in our workshop,very good finish and the color can keep 3-5 years;

Corten steel panel sheet Side panel Top panel Front end panel

Specification as follows:

ItemDescription
Standard&GradeASTM Standard: Corten A / Corten B / A588 GR.A  / A588 GR.B  / A242
EN Standard: S355J0W / S355J2W / S355J0WP / S355J2WP
JIS Standard: SPA-H / SPA-C
GB Standard: 09CuPCrNi-A/ B480GNQR / Q355NH / Q355GNH / Q460N
Thickness1.0-1.5mm for cold sheet scope; 1.6-40mm for hot rolled plate
Width&Length1000mm/1175mm/1220mm/1500mm/1800mm/2000mm
Length from cutting, as requirement
SurfaceMill surface Or Rusted finish
PackageStandard export package with metal pallet + angle bar protection +
ProcessingEdging/Laser(Plasma/Water Jet) cutting/Leveling/Slitting
ApplicationAgricultural vehicles and railway wagons, bridges, water pipes, fans, chimneys and boilers and outdoor sculptures
 

Common Grade Composition and Mechanical property as follows:

GradeCSiMnPSCrNiCuV
Corten A0.120.25/0.750.20/0.500.07/0.150.030.50/1.250.650.25/0.55 
Corten B0.160.30/0.500.80/1.250.030.030.40/0.650.40.25/0.400.02-0.10
A2420.12Max0.75Max1.00.06-0.150.030.3-1.250.10.25-0.55 
A588 GrA0.190.3-0.650.8-1.250.050.030.4-0.650.40.25-0.40 
A588 GrB0.20.15-0.500.75-1.350.040.050.40-0.700.50.20-0.400.01-0.10

Products Show

Corten Steel Panel Sheet Side Panel Top Panel Front End Panel
Corten Steel Panel Sheet Side Panel Top Panel Front End Panel
Corten Steel Panel Sheet Side Panel Top Panel Front End Panel
Corten Steel Panel Sheet Side Panel Top Panel Front End Panel



Corten Steel Panel Sheet Side Panel Top Panel Front End Panel


Corten Steel Panel Sheet Side Panel Top Panel Front End Panel


Also we can do the rust finish on the surface, and some introduction as follows:

Specification
Thicnkess: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.6mm, 2.0mmm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10mm etc.
Width: 1000-2000mm
Length: 2000mm, 2500mm, 3000mm....6000mm or as requirement

Rust finish process:
Step 1. The steel surface by shot peening or pickling to remove the surface scale.
Step 2. Preparation of weathering steel surface treatment agent, the weight percentage of 0.1% ~ 3% NaCl, 0.3% ~ 3% FeSO4 , 0.1% ~ 3% CuSO4 and 0.3% ~ 3% NaHSO3 mixed with water and poured into the barrel, Uniform until the solution was sky blue.
Step 3. Will be equipped with a good surface treatment agent into the sprayer, spray evenly on the steel surface for 3-5 seconds to the surface of the steel into a brown, spray finished once, so that the steel surface dry naturally, this time with suction absorbent material steel structure The lower part of the residual liquid, to ensure that the upper and lower drying time consistent until the steel structure after drying, repeat the spraying and drying process 2 times to ensure that the corten steel surface to generate a uniform and dense rust layer.
Due to the high corrosion resistance of corten steel sheets, it normally takes from 1 to 2 years from a completely new steel sheet to the formation of a stable, dense, rust-red protective layer (50-100mic thick) in natural environments. For some dry areas May be even longer.If you want to generate a simple uniform rusty yellow, it also takes about 1 month.In the process, the components of the color will occur uncontrollably, from blue and black to orange red, then rusty red, the last reddish brown Dramatic, uneven change process.

Corten steel panel sheet Side panel Top panel Front end panel

Rust finish photos for reference: 


Corten Steel Panel Sheet Side Panel Top Panel Front End Panel
Corten Steel Panel Sheet Side Panel Top Panel Front End Panel
Corten Steel Panel Sheet Side Panel Top Panel Front End Panel
Corten Steel Panel Sheet Side Panel Top Panel Front End Panel


Our company  ( Factory / Workshop / Warehouse / Team )  

Corten steel panel sheet Side panel Top panel Front end panel

Corten Steel Panel Sheet Side Panel Top Panel Front End Panel

Packing & Delivery & Certificate

Corten Steel Panel Sheet Side Panel Top Panel Front End Panel


The reason why you choose Tianjin TEDA Ganghua

ISO&SGS&BV Audited company

Advanced production line and inspection equipment

Finished Product Inventory: More Than 800 Tons.

Prompt delivery from stock.

Convenient transportation

We can offer competitive price with best quality&service

More than 10 years export experience 

Morethan 20 years industry experience

More than 30 countries worldwide customers
 

Q: How long is your delivery time?

A: Generally 5 days if the goods are in stock. or it 7-10 days if need some cutting, bending, rust processing;
 

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free for checking quality
 

Q: What is your terms of payment ?

A: Payment 30% TT deposit, 70% against B/L copy;  or Irrevocable L/C at sight from good reputation issuing bank;

Corten steel panel sheet Side panel Top panel Front end panel

Detail Contct info: