ISO9001 Waste Management Machinery for Solid Waste Treatment

China ISO9001 Waste Management Machinery for Solid Waste Treatment, Find details about China Waste Water Treatment, Dewatering Machine from ISO9001 Waste Management Machinery for Solid Waste Treatment

Model NO.
QD-EVU-20
Warranty
1 Year
After-Sale Service
Long Term
Material
SS304 SS316
Advantage
Clog Free
Operation
Automatic
Capital Investment
Low
Operation Cost
Less
Design
Customize
Sludge Cake Water Content
85%
Dried Sludge
10-30kg/H
Volage
220V 380V 415V
Supporting Machine
Chemical Dosing Machine
Trademark
Spark
Transport Package
Standard Shipping Package
Specification
4.5m*1.65m*2.13m
Origin
Qingdao China
HS Code
8421219990
Model NO.
QD-EVU-20
Warranty
1 Year
After-Sale Service
Long Term
Material
SS304 SS316
Advantage
Clog Free
Operation
Automatic
Capital Investment
Low
Operation Cost
Less
Design
Customize
Sludge Cake Water Content
85%
Dried Sludge
10-30kg/H
Volage
220V 380V 415V
Supporting Machine
Chemical Dosing Machine
Trademark
Spark
Transport Package
Standard Shipping Package
Specification
4.5m*1.65m*2.13m
Origin
Qingdao China
HS Code
8421219990
SCREW PRESS DEWATERING MACHINE
ISO9001 Waste Management Machinery for Solid Waste Treatment

A dewatering screw press is a screw press that separates liquids from solids. A screw press can be used in place of a belt press, centrifuge, or filter paper. It is a simple, slow moving device that accomplishes dewatering by continuous gravitational drainage. Screw presses are often used for materials that are difficult to press, for example those that tend to pack together. The screw press squeezes the material against a screen or filter and the liquid is collected through the screen for collection and use.

Advantages
Low operation cost: less than 40% of that of belt filter press, and less than 20% of that of centrifugal dewaterer;
Power saving: less than 5% of that consumed by the centrifugal dewaterer; water saving: less than 0.1% consumed by the belt filter press; and medicine saving: saved by 60%
Small volume: save the investment into dewatering room; non-blocking: the strong opponent against oil and fiber sludge;

Sludge Treatment Process
ISO9001 Waste Management Machinery for Solid Waste Treatment


Multi-disk screw press, also known as MDS dewatering press, is a kind of cutting edge sludge dewatering equipment with non-clogging design and low energy consumption, especially applicable for oily sludge.

Flow Diagram
ISO9001 Waste Management Machinery for Solid Waste Treatment

QDEVU Dewatering Machine Parameter
MODELDS STANDARD CAPACITY (KG/H)FLOW LOAD (M3/H)
LOW CONCENTRATIONHIGH CONCENTRATION2000MG/L10000MG/L20000MG/L30000MG/L50000MG/L
QDLX-131426260.60.50.870.4
QDLX-132852521.21.01.730.8
QDLX-201852521.21.01.730.8
QDLX-202161041042.42.03.471.6
QDLX-301201301303.02.54.332.0
QDLX-302402602606.05.08.674.0
QDLX-303603903909.07.5136.0
QDLX-351402602606.05.08.674.0
QDLX-35280520520121017.38.0
QDLX-35312078078018152612
QDLX-35416010401040242034.6816
QDLX-402135884884201729.513.6
QDLX-403200132613263025.544.220.4
QDLX-40426617681768403458.927.2

Dewatering Principle
ISO9001 Waste Management Machinery for Solid Waste Treatment

The initial section of dewatering drum is the thickening zone, where the solid-liquid separating process takes place and where the filrate will also be discharged.The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the end plate further increases the pressure, so as to discharge dry sludge cake.

Main Features & Comparison
ISO9001 Waste Management Machinery for Solid Waste Treatment

Application
ISO9001 Waste Management Machinery for Solid Waste Treatment
Certificates
ISO9001 Waste Management Machinery for Solid Waste Treatment

Thanks and please be free to contact Nick!!!