32cav. PET Injection Mould
China 32cav. PET Injection Mould, Find details about China PET mould, PET preform mould from 32cav. PET Injection Mould
Basic Info.
Model NO.
115
Runner
Hot Runner
Design Software
UG
Installation
Fixed
Standard
HASCO
Customized
Customized
Cavity
32 Cavities
Trademark
Hengxin
Specification
32 Cav. PET preform mould
Origin
Huangyan, China
HS Code
84807100
Model NO.
115
Runner
Hot Runner
Design Software
UG
Installation
Fixed
Standard
HASCO
Customized
Customized
Cavity
32 Cavities
Trademark
Hengxin
Specification
32 Cav. PET preform mould
Origin
Huangyan, China
HS Code
84807100
Product Desciption
32 cav. PET Injection mould
1. Usually, Multi-cavity pet preform mould does use the hot runner system rather than cold runner system, so the design of hot runner system plays an important role in mould quality guarantee. Based on foreign advanced techniques and combined with domestic clients demand, we adopt the valve gated design, in which each cavity has its own heating zone and temperature is measured by independent thermocouple. (advantages: Easily avoid some problems such as white or draw bench on bottom). Here, Mould is produced automatically to reduce labor force.
Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45). In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max. Part and min. Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)
2. Our mould, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.10mm; Weight difference is less than 0.3G; 2-5 moulds per minute; Utmost 144 cavities in one mould.
Main feature:
Cavity from 1 up to 144.
Control system with simulating stretch testing improve rate of production.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentrically.
4. Material of mould die core and die cavity are made of Sweden S136 special mould steel.
5. Standard screw neck, imported nitride steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 3 million shots guarantee.
1. Usually, Multi-cavity pet preform mould does use the hot runner system rather than cold runner system, so the design of hot runner system plays an important role in mould quality guarantee. Based on foreign advanced techniques and combined with domestic clients demand, we adopt the valve gated design, in which each cavity has its own heating zone and temperature is measured by independent thermocouple. (advantages: Easily avoid some problems such as white or draw bench on bottom). Here, Mould is produced automatically to reduce labor force.
Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45). In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max. Part and min. Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)
2. Our mould, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.10mm; Weight difference is less than 0.3G; 2-5 moulds per minute; Utmost 144 cavities in one mould.
Main feature:
Cavity from 1 up to 144.
Control system with simulating stretch testing improve rate of production.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentrically.
4. Material of mould die core and die cavity are made of Sweden S136 special mould steel.
5. Standard screw neck, imported nitride steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 3 million shots guarantee.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover