Laser weld fume purifier for industry 

Features 

Fume collector is configured with one suction arm. The bottom has two directional and two rotary polyurethane casters with brake device for easy moving and stationing. It is suitable for the purification of fume  and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious materials.

Suction arm can be rotated 360 °, and can flexibly and easily reach the position and angle of sucking by pulling the handle of  the hood and position by itself in the absence of external force. Depending on needs, 2m, 3m flexible suction arm are available. Suction hose uses high temperature-resistant, flame retardant and wear-resistant composite materials, and will not crack after burning through by spark and has a longe usage life, the arm diameter is 160mm.

Fume generated in working will be sucked into the purifier through the hood, first through the fire resistance net, large particles and sparks produced in grinding is intercepted and separated; then enter fume directinglayer,i.e. deflector,  to ramify the fume to avoid residual spark into the main filter cartridge directly;  at last the fume enter the third layer.

Power phase sequence instructions, short-circuit protection for lack of phase, with shut down protection measures when too high temperature.

With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage to sparks.
 

Technology parameter: 

 
                

                                                 Company Information