Working Principle
The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer preventer plate which will ramify the fume to avoid residual sparks enter into filter layer directly. Finally, the fume enters the second layer of HEPA filter cartridge for ultimate purification, and HEPA 's filtration efficiency can reach 99.9%. As the filtering precision of the main filter cartridge reaches the indoor emission standard, the filtered clean air can be directly discharged indoor via the vent in the bottom of the extractor. 

 
Product introduction

1. For the potential of fire and molten slag particles, two protective measures are used inside purifier, to make it a longer life, more secure and reliable.

2. For the KSJ-0.7S semi-automatic model purifier, its electric control is simple, automatically cleaning relying on the internal pressure sensors, and also can by manual. Filter rotates with the use of semi-automatic cleaning in all directions, so that there is a more thorough cleaning filter surface,  to guarantee a constant air volume absorption.Filter is made of  imported microporous filtering paper , filtering with high precision can meet GB indoor emission standards.

3. Power phase sequence instructions,  short-circuit protection for lack of phase, with shutdown protection measures when too high temperature.

 

Main feature
1. Low amounts of smoke/dust
2. Occasional use
3. Depending on needs, 2m, 3m flexible suction arm are available. 
4. Semi-automatic/manual cleaning
5.  CE certification, EMC certification
6. Operating controls conveniently 
 

Standard Parameters

 
Company profile