GD-5096A Copper Strip Corrosion Test Apparatus for ASTM D130 Copper Strip Corrosion Test


I. Test Method of Copper Strip Corrosion:

Put a polished copper strip immersed in a specific volume of the sample being tested and heated under conditions of temperature and time that are specific to the class of material being tested. At the end of the heating period, the copper strip is removed, washed and the colour and tarnish level assessed against the ASTM copper strip corrosion standard.


II. Introduction of Copper Strip Corrosion Test Apparatus ASTM D130

The Copper Strip Corrosion Tester  is designed and made as per national standard of People's Republic of China GB/T 5096 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test and ASTM D130 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by Copper Strip Tarnish Test. 
The Copper Strip Corrosion Tester is suitable to determine the corrosiveness to copper of aviation gasoline, aviation turbine fuels, automotive gasoline, tractor fuels, washing solvent, kerosene distillate, lubricating oil, and other petroleum products. The instrument has functions of temperature controlling, automatic timing and alarming.


III. Key Features:

1. The copper corrosion bath adopts LCD temperature controller,heater and electric stirrer to form the constant bath. The temperature in bath is uniform. The temperature controller has timing function.It can control the test time and automatically timing. There will be alarm when finished.
2. The copper corrosion bath has four sample holes. One bomb or three tubes can be put in each hole to be determined.The test efficiency is high.
3. The copper corrosion bath equips a standard color board imported from USA. It can meet requirements of test method.


IV. Main Parameters:

1. Power supply:  AC(220±10%)V, 50Hz
2. Total power consumption: ≤1800W
3. Temperature sensor:  RTD, Pt100
4. Temperature range:  Ambient to 100ºC,can be set at will
5. Temperature control accuracy:  ±1ºC
6. Time controlling range:  1 minute~24 hours, can be set at will.
7. Sample testing positions:  Four positions
8. Sample quantity at one test: 4 pieces~12 pieces
9. Ambient temperature:  15ºC~35ºC; Relative humidity: ≤ 85%
10. Dimension:  440mm*330mm*560mm
11. Net weight: 16kg.


V. Real Picture of Copper Strip Corrosion Test Apparatus(ASTM D130)