10' Pes Pleated Filter Cartridge with Dubble Support Layer

China 10′′ Pes Pleated Filter Cartridge with Dubble Support Layer, Find details about China Cartridge Filter, GF Cartridge Filter from 10′′ Pes Pleated Filter Cartridge with Dubble Support Layer

Basic Info.

Model NO.

Pes filter Cartridge

Trademark

QingFeng, OEM

Transport Package

Carton Packing

Specification

Length: 5 Inch, 10 Inch, 20 Inch, 30 Inch, 40 Inch

Origin

China

HS Code

8421999000

Model NO.

Pes filter Cartridge

Trademark

QingFeng, OEM

Transport Package

Carton Packing

Specification

Length: 5 Inch, 10 Inch, 20 Inch, 30 Inch, 40 Inch

Origin

China

HS Code

8421999000

Product Desciption

PES Filter Cartridge
Introduction:

The filtration media of PES micropore filter cartridge is PES membrane. High porosity(about ≥80%) and geometrically unique pores of the PES cartridge contribute to high throughputs for difficult-to-filter solutions. It is constructed of two materials PES and PP to meet high standards of chemical and pharmaceutical industry. The benefit summary: unique hydrophily, no including surfactant and lubricant, so it provides wide filtration pore size and high folow rate, its wide range of PH values and lower adsorbance of protein and valuable biologicals, high retention rate, super chemical tolerance and thermal stability, good intension, withstand shocks and back pressures. All products have passed 100% integrity testing.

Specification:

Filter medium: hydrophily PES membrane
Support layer: PP
Filter cage: PP
Pore size: 0.1, 0.2, 0.45, 0.65, 1 (um)
Length: 5", 10", 20", 30", 40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area: ≥0.57square meter/10inch
Diameter: 68mm
Working temperature: ≤60ºC
Max. operating temperature:90ºC, 0.01Mpa
Max. bear temperature: 140ºC, 0.28Mpa
Max. positive pressure: 0.42Mpa (23ºC)
PH value: 2--13
Sterilizing temperature: 121ºC 30min
Others: special requirement of diameter and end caps can be customized
Seloct filter cartridge, refer to P10 (Interface/End caps)

Typical Applications:

Pharmacy industry; Food industry; Electronic industry etc.

Materials of Construction
Filter Media	Highly Asymmetric, Hydrophilic PES
Core, Cage	PP
End Caps	PP
O-rings/Gasket	Silicone/EPDM/Viton
Sealing technology	Thermal Bonding, No Adhesives
Dimensions
Diameter	Φ 68 (2.67 in)
Length(in)	5, 10, 20, 30, 40
Filtration Area
≥ 5.7 ft2/10 in (≥ 0.53 m2/250 mm)
Pore Size, μm
0.1, 0.22, 0.45, 0.65,1.0
Maximum Forward Differential Pressure
4.2 bar@23ºC
Integrity Test- water bubble point at 23 ºC
0.22μm:≥3100mbar (44.96psi)
0.45μm:≥1800mbar (26.1psi)
Sanitization
May be hot water sanitized for 30 cycles using purified water at 85ºC(185ºF) for 30 minutes.