Mf910 Hot Applied Butyl Sealant for Insulating Glass
China Mf910 Hot Applied Butyl Sealant for Insulating Glass, Find details about China Hotmelt Sealant, One Components Sealant from Mf910 Hot Applied Butyl Sealant for Insulating Glass
Basic Info.
Model NO.
MF910
Bonding Material
Glass
Trademark
SILANDE
Transport Package
Drum
Specification
6.5kg/box
Origin
China
HS Code
3506919090
Model NO.
MF910
Bonding Material
Glass
Trademark
SILANDE
Transport Package
Drum
Specification
6.5kg/box
Origin
China
HS Code
3506919090
Product Desciption
MF910 Hot Applied Butyl Sealant for Insulating Glass
Primary Sealant for the Manufacturing of Insulating Glass
.APPLICATION FIELD
SURFACE PREPARATION
GLASS / SPACER - lb achieve good adhesion, the glass / spacer surface must be clean, dry and free of any residue.
SILANDE MF910 shall be applied at a temperature between 100 °C and 150 °C using appropriate extruders.
APPLICABLE STANDARDS
PACKAGING7 kg/barrel (<P 190mm)
6 kg/barrel (<P 185mm)
5 kg/barrel (0 160mm)
2 kg/barrel (<P 126mm)
FIRST AID INFORMATION
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give person two glasses of water. Never give anything by mouth to an unconscious person. Keep out of reach children. Refer to Material Safety Data Sheet (MSDS) and Technical Date Sheet (TDS) for details.
According to the method specified in GB/T1033
(Dipping method) proceed.
Data accuracy is controlled within ±0.0001g
Mettler analytical balance
In this test, according to the JC/T 914 standard, 6 cube specimens with a side length of 20mm were made. After weighing, they were placed horizontally under standard conditions for 8 hours, and 5 of them were placed in an oven at 130°C. After 50h, measure the mass loss of the heat-treated sample and check the surface changes.
Sample
This indicator is to characterize the pros and cons of product flexibility. The test refers to the method specified in the recovery value in GB/T 12828, and the sample is a cube with a side length of 20mm.
William Plastometer
This index characterizes the softness and hardness of the product at room temperature and the hot melt performance and rheological properties at high temperature. The normal temperature value (25°C) characterizes the state of the sealant during use; the high temperature value (130°C) characterizes the state of the sealant during construction. The test method adopts the JC/T914 standard, the test mold is type A, and the test time is 5s.
Penetration Tester
Primary Sealant for the Manufacturing of Insulating Glass
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
| TEST ITEMS | TEST RESULTS | TESTS1ANDARD |
| Base | Polyisobutylene (PIB) | - |
| Color | Black | - |
| Appearance | Solid mass | GB/T 1033.1 |
| Density | 1.1/1.25 fe/cm3] | JC/T914 |
| Shear Strength | 0.21 MPa | |
| Penetration (1 /1 Omm) | 25°C 40 | |
| 130°C 290 | JC/T 914 | |
| Volatile Content | Max. 0.02 % | |
| Fogging | Without visual fogging | - |
| Moisture Vapour Transmission Rate (MVTR) | 0.26 [gr/m2.24hrs. 2mm] | EN1279-4 |
| Gas Permeation Rate (Ar) | 1.30x10-3[gi7m2. hrs] | EN1279-4 |
SURFACE PREPARATION
GLASS / SPACER - lb achieve good adhesion, the glass / spacer surface must be clean, dry and free of any residue.
SILANDE MF910 shall be applied at a temperature between 100 °C and 150 °C using appropriate extruders.
APPLICABLE STANDARDS
- EU Specification: EN1279 - part 4
- China Specification: JC/T 914
- SHELF LIFE AND STORAGE
PACKAGING
6 kg/barrel (<P 185mm)
5 kg/barrel (0 160mm)
2 kg/barrel (<P 126mm)
FIRST AID INFORMATION
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give person two glasses of water. Never give anything by mouth to an unconscious person. Keep out of reach children. Refer to Material Safety Data Sheet (MSDS) and Technical Date Sheet (TDS) for details.
According to the method specified in GB/T1033
(Dipping method) proceed.
Data accuracy is controlled within ±0.0001g
Mettler analytical balance
In this test, according to the JC/T 914 standard, 6 cube specimens with a side length of 20mm were made. After weighing, they were placed horizontally under standard conditions for 8 hours, and 5 of them were placed in an oven at 130°C. After 50h, measure the mass loss of the heat-treated sample and check the surface changes.
Sample
This indicator is to characterize the pros and cons of product flexibility. The test refers to the method specified in the recovery value in GB/T 12828, and the sample is a cube with a side length of 20mm.
William Plastometer
This index characterizes the softness and hardness of the product at room temperature and the hot melt performance and rheological properties at high temperature. The normal temperature value (25°C) characterizes the state of the sealant during use; the high temperature value (130°C) characterizes the state of the sealant during construction. The test method adopts the JC/T914 standard, the test mold is type A, and the test time is 5s.
Penetration Tester
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier