Technical parameters:

 

Items	Technical Parameters		Image
Name	200KHz ultrasonic transducer
Model	PHA-200-01EA
Frequency	200KHz±5%
Detection Distance	0.10~1.5m
Minimum Parallel lmpedance	600Ω±20%
Capacitance	800pF±20% @1KHz
Sensitivity	Driving Voltage:750Vpp,Distance:0.3m, Echo Amplitude:20mV
Operating Voltage	Peak Voltage<1000 VPP
Operating Temperature	-40~+80ºC
Pressure	≤3Kilos or 0.3MPa
Angle	(Beamwidth) Half-power Beam Width@-3dB:8°±2, Sharp Angle:19°±4
Housing Material	stainless steel
Usage	Ultrasonic level gauge,Monitoring,Crashproof
Installation Dimension	IP68
Protection Level	10g±5%( Length:20cm)
Weight	integrated type:connector:Red+,White-,Black: shielded wire;
Admittance Curve		Product Structure Diagram

Block diagram of ultrasonic distance transducer :



Schematic Diagram of Temperature Sensor (model: MF58_502F3470):



Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding



2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)


Red and black are temperature sensor wiring


 Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
    Red: Transducer +
     Blue: temperature sensor +
     Black: Public-


 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor