China 33kHz Underwater Ultrasonic Transducer for 500m Depth Measurement, Find details about China Ultrasonic Transducer Water Depth, Ultrasonic Depth Transducer from 33kHz Underwater Ultrasonic Transducer for 500m Depth Measurement
Items | Technical Parameters | Image | |
Name | 33KHz underwater ultrasonic transducer | ![]() ![]() | |
Model | PHW-33 | ||
Frequency | 33KHz±3KHz | ||
Detection Distance | 3 ~ 500m | ||
Minimum Parallel lmpedance | 300Ω±20% | ||
Capacitance | 4500pF±20% @1KHz | ||
Sensitivity | Driving voltage:24 Vpp,Distance:0.3m, Echo Amplitude:500 mV | ||
Operating Voltage | Peak Voltage<700VPP | ||
Operating Temperature | -40~+80ºC | ||
Pressure | ≤3Kilos or 0.3MPa | ||
Angle | Beamwidth)Half-power Beam Width@-3dB:38°±3, Sharp Angle:104°±4 | ||
Housing Material | POM | ||
Usage | Ultrasonic flowmeter,submarine range finder | ||
Installation Dimension | Checking product structure diagram below | ||
Protection Level | IP68 | ||
Weight | 370g±5%(Length:2m) | ||
Wiring Instructions | Red: transducer +, white: transducer -, black: shielded wire; ( temperature sensor is optional ) | ||
Admittance Curve | Product Structure Diagram | ||
![]() | ![]() |
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor