China T11 20FT Grade Food ISO Tank Containers for Sale, Find details about China T11 ISO Tank Container, ISO Tank Containers for Sale from T11 20FT Grade Food ISO Tank Containers for Sale
T11 20ft Grade Food ISO Tank Container
Type: Vertically Mounted & Horizontal Mounted
Standard: GB or ASME
Size: 20ft 40ft
Material: Stainless steel, ASTM A240, 316/316L low carbon
Maximum Allowable Working Pressure: 4.0 Bar (58.0 PSI)
Certificate: GL/LR/BV/ABS and etc.
Cargo Temperature: 130°C (266°F)
Design Approvals: IMDG T11, RID/ADR, ASME VII DIV2, CFR 48, USDOT (BYSP), TIR, UIC, CSC, TC, UKDFT, FRA
Application: food grade ISO tank container for food storage and transport, like milk, water, edible oil and etc.
Food Grade ISO Tank Container | ||
Frame Dimensions (L x W x H) | 6058 x 2438 x 2591 mm | |
Nominal Capacity | 19000 litre (± 0.75%) | |
Maximum Gross Mass | 36000 kgs | |
Tare Mass | 3900(TBC) kg (± 3%) | |
Design Temperature (Frame & Tank) | -40 to +130 °C | |
Pressure | Working Pressure | 4.0 bar |
Test Pressure | 6.0 bar | |
Material | Tank (Shell & Ends) | SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%) |
Frame | SPA-H or equivalent | |
Insulation (Shell) | 25mm Rockwool (50kg/m3) covered with 25mm PU Insulation Sandwich insulation system with nominal thickness 50mm. A protective polythene sheet is provided over the insulation prior to cladding. Reinforced insulation on top against walking. | |
8 longitudinal runs steam heating system on barrel. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted. | ||
1-off. DN80 flanged Supermaxi Highflow, without flameproof gauze. Pressure only model set at +4.4 bar (63.8psi). Provisional space for the future fitting of a bursting disc and pressure gauge. The assembly is situated off centre on a tangential tank pad in Front Centre spillbox. | ||
Bottom Discharge | DN80 45° Cleanflow Internal footvalve with clamped DN80 butterfly valve terminating with a 3" male stainless steel Camlock with female cap. | |
Thermometer | A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar. | |
Design Code | ASME VIII DIV. 1 | |
Approval | IMDG-T11 US DOT CFR 49(appraisal only) RID/ADR CSC TC TIR / Customs UIC ISO-standards |