Fiberglass pre-immerged resin sheet (FRP ) as skin panel on both sides, PP honeycomb as core. They are composited from high pressure and heating. The features of our FRP PP honeycomb sandwich panels are light weight, high stiffness, sound damping, fire-retardnat, quakeproof, insulation, environmental friendly. They are applicable to the apartments and external walls of building and truck body, widely Used in boat, yatch, wind turbine, sports, tank cover and so on.

FRP surface thickness from 0.3mm to 3mm made according to clients request.

UV-treatment, anti-slip, sand surface, gel-coat treatment, painting treatment and so on can be made according to clients request.

Standar specification: 1220*2440mm, container size: 1150*2300mm

Maximal specification: 2500*6000mm

Polycore Technology is a leading manufacturer of honeycomb and lightweight composite solutions. Thermostat plastic honeycomb holding light weight with stiffness strength ratio and following characteristics: Energy absorption; Corrosion, fungi, rot, chemical, moisture resistant; Sound and vibration dampening; Recyclable; Electrical characteristics; Magnetics characteristics; Flexible; Easy assembly

PP honeycomb sheet laminated with polyester tissue on both sides. This allow better bonding of the honeycomb to different surface panel. In addition to the tissue, honeycomb can laminated with a layer of PP film. The film under the tissue acts as a barrier to prevent resin leaking into the core thus save resin consumption in next assembly process Besides there is more stiffness plastic sheet with more thicker tissue.

Honeycomb cores are used in the fabrication of lightweight structures. The core material is typically 'sandwich' with plywood, aluminum, , FRP composite material, steel, granite, solid surface materials, paper etc. To attach the surface material to the honeycomb sheet, a bonding adhesive can be used or the materials can be laminated with polyester or epoxy systems. The resultant honeycomb panel results in one of the highest strength to weight core constructions available.

PP honeycomb sheet can be laminated with foam on the both sides and made to customer requirement, so it can be widely used in sports activity provide safety protection for sportsman, such as elbow protector, kneepad, chest protector, helm, crash helmet. Honeycomb core energy absorption property and high anti-pressing strength improve protection.

New polypropylene (PP) honeycomb reportedly provides greater strength-to-weight ratio than traditional polyaramid or aluminum honeycombs. The cells of the PP honeycomb are essentially circular rather than hexagonal and are fused together rather than glued. The recyclable honeycomb can be thermoformed and cut to shape easily has energy-absorbing and sound- and vibration-damping properties, and is resistant to fungus, rot, chemicals and moisture. Applications include core material in composite sandwich panels used in marine, automotive, rail, truck, and materials handling.

Light weight, high compressive strength, anti-water, anti-humidity honeycomb can be used as a core structure in the transportation fields such as aerospace, aircraft, boat, yacht, van, marine, automotive, truck, rail, In this application. Honeycomb can cut down body weight, increase speed, save energy, whilst providing strength and lessen shakiness.

In the construction fields such as architectural, port, bridge, recreation, partition parts, ceiling, floor, wall, in this application, honeycomb can speed project process, dampen sound pollution, save energy cost.

In special fields such as military, medical, oil tank cover. Equipment, electronic, pharmaceutical, food, consumer, trailer and a variety of other composite structures. In this application, honeycomb can provide special property to cater to special requirement such as electronic or Magnetics penetration, anti-chemical corrosion, anti-fire, anti-water, cleanness and others.