China Made Easier Installation Brass Manifolds with 5 Years Warranty

China Made Easier Installation Brass Manifolds with 5 Years Warranty, Find details about China Manifolds, Brass Mnifolds from China Made Easier Installation Brass Manifolds with 5 Years Warranty

Basic Info.

Model NO.

Flow meter

Type

W/ or W/O Flow Meter

Connection

with 16mm 20mm Pipes

Eurocone

16X1/2, 16X3/4, 20X3/4

Trademark

ASB/OEM

Transport Package

Cartons/Pallet

Specification

2-12 ways

Origin

China

HS Code

8481804090

Model NO.

Flow meter

Type

W/ or W/O Flow Meter

Connection

with 16mm 20mm Pipes

Eurocone

16X1/2, 16X3/4, 20X3/4

Trademark

ASB/OEM

Transport Package

Cartons/Pallet

Specification

2-12 ways

Origin

China

HS Code

8481804090

Product Desciption

PRODUCT DISCRIPTION

ASB Stainless steel manifold with flow meter are manufactured from stainless to the highest standards.

A unique feature is that connections to the heating pipe are Speed-fit Push-fit, offering much-reduced installation time

All manifolds are pre-fitted with brackets, vibration isolation mounts, and an automatic air vent. Flow rate indicators include the means to adjust flow rate and isolate circuit.

It can be assembled to suit left or right-hand supply depending upon project type.

Download catalogue: stainless steel manifold with flow meter

China Made Easier Installation Brass Manifolds with 5 Years Warranty

PRODUCT SPECIFICATION

Code	Size	Ways	L(mm)	D(mm)
53010/53110	1"	2	104	50
53010/53110	1"	3	154	100
53010/53110	1"	4	204	150
53010/53110	1"	5	254	200
53010/53110	1"	6	304	250
53010/53110	1"	7	354	300
53010/53110	1"	8	404	350
53010/53110	1"	9	454	400
53010/53110	1"	10	504	450

PRODUCT DETAILS

Type	Stainless steel manifold 1"	Stainless steel manifold 1 1/4"
Connection	1" Female thread	1 1/4" Female thread
Version	2 fold-12 fold	2 fold-12 fold
Outflow	3/4" Eurocone	3/4" Eurocone
Valve distance	50mm	50mm
Equipment	* 1" profile pipe	* 1 1/4" profile pipe
	* Thermostatic valves for manual regulation or electrica actuators 230V	* Thermostatic valves for manual regulation or electrica actuators 230V
	* Topmeter(0.5-2.5l/min) or fine regulating valves 3/8"	* Topmeter(1-4l/min) or fine regulating valves 1/2"
	* Sealing end	* Sealing end
	* Ventilation valve	* Ventilation valve
	* 3/8" end plug	* 1/2" end plug
	* Sound-insulating fastening elements	* Sound-insulating fastening elements
	* Sticker for marking the heating cycles	* Sticker for marking the heating cycles

OVERVIEW OF ASB MANIFOLDS?

Application: Underfloor heating installations on solid or wooden floors.

Pipe: 15mm ASB barrier pipe to BS 7291 Part 1, 2 and 3 Class S.

Do not use ASB underfloor heating products for gas, oil or compressed air applications.

Floor insulation: suitable material and thickness should be used to comply with current regulations.

Minimum bend radius: 175 mm for ASB Pex-b pipes.

Expansion (PEX-Pipe): 1% of the length between 20°C and 82°C.

Paints and chemicals: Use only water-based or oil-based paints. Do not come into contact with cellulose based paints, paint thinners or paint strippers, fluxes, acid based descaling agents or corrosive household cleaning products.

Exposure to sunlight: ASB products are not affected by sunlight when used indoors. When used outdoors, they are protected from UV exposure by overmolding or painting.

Pipe insertion: . Plastic pipes must be used for all installations when used and should be fully inserted.

Electrical components: The electrical products in ASB underfloor heating systems are designed for use in UK power supply situations only.

Electrical continuity: If ASB is used in an existing metal system that may have been used for earthing, electrical continuity should be restored.

Collet Clamps: White and grey collet clamps are used with standard fittings to prevent accidental disconnection of pipes. Red or blue clamps provide the colour coding of the pipe. Red and blue clamps should not be used to prevent accidental disconnection of the pipe.

Pre- screed system test: To ensure that the pipes are correctly installed prior to laying the screed, the system must be checked and a hydraulic wet test carried out.

The test should be carried out at 2 bar for 10 minutes and at 10 bar for 10 minutes.