MEGATRO 65m mobile communication Tower 
MEGATRO is a full service engineering company with a global reputation for delivering excellence and innovation in telecommunications systems.
Over 10 years of experience and innovation in engineering, designing and building towers has evolved MEGATRO into its current form:
   Full Turn-Key provider including site acquisition, engineering services, manufacturing,   field services-DAS, tech services, value added reseller and monitoring, maintenance and network ownership
  Specialize in developing supplying and building wireless and wired networks and in-building telecommunications systems, as well as energy infrastructure
  Single source from Design to System Integration
   Top quality, ISO 9001 registered
A complete selection of towers including self-support, lattice steel tower, monopoles and guyed towers, form custom-designed radar towers to broadcast towers and energy infrastructure. MEGATRO carries a variety of related products including fall protection, transmission lines, antennas, obstruction lights, and accessories, and other products if client need, MEGATRO also tailored product as per client condition. 

MEGATRO mainly design all kinds of towers and posts for:
a.    Telecoms
b.    Power transmission
c.    TV and Radio Broadcast
d.    Roads and City Development
e.    Wind tower and energy solution 
f.    Steel workshop and other steel structures 
g.    Lightning protection and tower earth kits 

Our complete selection of towers includes:
a.    Self-supporting
b.    Monopoles
c.    Guyed towers
d.    Custom-designed radar towers
e.    Broadcast towers
f.    Power transmission

MEGATRO also designs and manufactures tower related products including:
a.    Fall protection
b.    Antenna brackets
c.    Other accessories if needed by clients
This photo refers to our MEGATRO 35m mobile communication Tower, which we exported to some Asian and African countries these years. It is standard design with weight not too heavier, some of design data as follow:
65m of 4 Legged Mast or 3 legged tower, Self support lattice tower 
Design criteria/Loading (General)
All design and loading shall be calculated in accordance with one of the following:-
BS:-BS 8100: Part1: 1986; BS 6399: Part1: 1996; Part2: 1997; Part 3: 1988 and BS648: 1964.
ANSI/TIA/EIA-222-G
Maximum allowable rotation in top Point...…........ (0.25 º Deg)
Safety factor: 2.0
Tower design as non-sway Self support structure

Main Load
1) Microwave Dish
Diameter................................... 1.2m + 1.8m
Weight.................................….. 100 + 135 kg
Location on the Tower ................. At the top, in any direction
NO of Microwave dish ................. (4*1.2m)+ (4*1.8m) pieces
2) GSM antennas
Diminutions...........................….…... 0.3x3x0.11
Weight...................................... 20 kg
Location on the mast ............... at the top, in any direction
NO of GSM antennas ........................... 6 pieces

Feeder (antennas cables)
Diameter ..............................…..... 7/8"
Weight ...................................... 5 kg / m
Location on the tower .........…......... From the bottom to the top
NO of cables .................. two cables for each GSM antennas

Secondary Load
Wind Load
Wind speed....................................150 km/h
Operational wind speed ...….................................... 112.5 Km/h
Temperature Load
(-7c° - 45c°) it is the ruing temperature in Yemen.
1.2. Soil Specification
Bearing capacity :-
0.9 Kg/Cm²
2 Kg/Cm²
3.5 Kg/Cm²

Dead loading
The self-weight of towers including ladders and platforms is based on nominal sizes of members with an appropriate allowance for gussets, bolts and welds.

Wind Loading
Two basic types of towers may be considered and this is
A) "heavy" range.
The heavy range should be designed for a basic wind speed of 41,666 m/s at an altitude of 150m. This data is preliminary and may be altered as soon as more accurate wind information data will be available.

Live Load
Individual members with an angle of 30º to the horizontal or less shall be designed to support a 1.5kN
vertical point load at mid span.
Towers shall be designed as Class "II" structures - exposure category "D" - topographic category (3) according to ANSI/TIA/EIA-222-G or equivalent by in BS 8100: Part 1: 1986; Figure 2.1. (Range between?(300 and 700) meters ) .
The serviceability check of the towers will be carried out in accordance with BS 8100 clause 3.3. Or equivalent by ANSI/TIA/EIA-222-G
The rotational displacement for any tower structure shall be limited to 0.5º measured at the highest dish level.

Steelwork
The plan shape of tower is square
For lattice towers all steelwork including angles, flats and round solid bars will be hot rolled Grade S275 or S355 to BS EN 10 025. Also steelwork circular hollow sections will be hot rolled S275 or S355 to BS EN 10 210.
Bolts will be hot dip galvanized in accordance with BS 7371: Part 6: 1998.

The work plats should distribution on height of tower each 10m, except the end work pleat should put on distance 3m from the top of tower.


Antenna supports
Each tower need the number of antenna supports as following:-
1- GSM antenna . . . . . . . . . . . . . . . . . . . . . . . 6 pieces
2- Microwave antenna . . . . . . . . . . . . . . . . . . 8 pieces


Concrete work
The concrete work should be designed by ACI-318M-05 requirements. Take care for following design
criteria:-
1- Concrete strength Fc/28days 21 MPa
2- Reinforcement strength Fy 280 MPa
3- The maximum bars size which use in design reinforcement concrete is 20mm. (Diameter of bar)

Access & Climbing
All base station towers shall be fitted with a access ladder in part complying with BS 4211. The access system shall also comprise a GlideLock/RailLock or similar approved system. Sufficient work platforms shall be provided each 10m height of tower.

Design life
Tower structures:
Minimum structural Design Life shall be 30 years.

Coating (Thickness of zinc)
Coating should not less 100 μm according ASTM A123 / A123M ( Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products ).
ICAO standard 

Codas and Standards
British Standards/ Code of Practice and Euro standards or find the equivalent which is recommended by ANSI/TIA/EIA 222-G.
BS 648 Schedule of weights of building materials
BS 4211 Specification for ladders for permanent access to chimneys, other
high structures, silos & bins.
BS 4395 Specification for high strength friction grip bolts & associated nuts
& washers for structural engineering. General grade.
BS 5395 Stairs, ladders & walkways. Code of practice for the design,
Construction & maintenance of straight stairs & winders.
BS 5493 Code of practice for protective coating of iron & steel structures
Against corrosion.
BS 5930 Code of practice for site investigations.
BS 5950 Structural use of steelwork in building. Code of practice for design.
Rolled & welded sections.
BS 6399 Loading for building
BS 6651 Code of practice for protection of structures against lightning.
BS 7371 Part 6 / ASTM A123 - A123M : Specification for hot dipped galvanised coatings on
Fasteners or steel products .
BS 7430 Code of practice for earthing.
BS 8004 Code of practice for foundations.
BS 8100 Lattice Towers and Masts
BS EN 1011 Welding. Recommendations for welding of metallic materials.
General guidance for arc welding

Fabrication
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot dip galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard

Connections:
Bolts (ISO 8.8, SAE Grade 5, or ASTM A-325) + flat washers, nuts and spring
washers (5% hardware overage)
Anchoring: Anchor rods (ASTM F1554) used with leveling nuts and a positioning template

Shipment: Standard 20' to 40' ISO container

Documentation:
• Detailed packing list
• Installation & maintenance manual
• Foundation design

For this 65m four (three) legged mobile communication tower and accessories, Our MEGATRO performs in-house design activities by PLS software or other software. Our Engineering Department is boasting of highly qualified engineering who are conversant with international codes and standards. The work is carried out with extensive use of CAE/CAD via a large of computer network. The computer hardware & drafting software are liked to the CNC workshop equipment for downloading of information thereby eliminating error and saving valuable production time. 

After fabrication all poles are delivered to the galvanizing facility to be Hot Dip Galvanized. Poles are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.

Moreover, we offer cost effective range of development and installation service regarding as an additional installation service. These are further, designed for both government and civil communications and suitable for both far-off and short distance communications. For additional protection, we cover these with protective shield to prevent the radioactive fallouts.

Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Minimum order: 1 set
Fabrication standard: Chinese Standard or other standard which client accepted


APPLICABLE STANDARD AND CODES
All towers manufactured and design shall be generally in accordance with latest revision of the following standards except where specifically directed otherwise. 
General 
IEC 60050 (151)                         International Electro-technical Vocabulary 
                                       Part 51 Electrical and Magnetic Devices
IEC 60050 (601)                      Chapter 601: Generation, transmission and distribution of electricity-General 
IEC 60050 (601)                    Chapter 601: Generation, transmission and distribution of electricity-Operation
IEC 60059                              IEC standard current ratings 
Chinese Standard 
American Standards:
DIN VDE 0101                       -  Isokeraunic Level
VDE 0201                              - Climatic and environmental   conditions
CVDE 0210                           -  Minimum safety factors under    simultaneous working loads
ISO R898 Mechanical Properties of Fasteners 
BS EN ISO 1461:1991 - High dip galvanized coatings on fabricated iron and steel articles. Specifications and standards
A) BS 5950: Welding Terms And Symbols
B) BS 729: Hot - Dip Galvanised Coating On Iron And Steel Articles
C) BS 2901: Filler Rods And Wires For Gas Shielded Arc Welding: Part 1 Ferritic Steels
D) BS 3692: ISO Metric Precision Hexagon Bolts, Screws And Nuts
E) BS 4360: Weldable Structural Steel
F ) BS 5135: Metal - Arc Welding Of Carbon And Carbon Manganese Steel
G) BS 5950: Part 1: Code Of Practice For Loading Latticed Tower & Masts
Part 2: Guide To The Background And Use Of Part 1"Code OF Practice For Loading"
Part 3: Strength Assessment of Members
H) DD 133 (1986): Code Of Practice For Loading Latticed Tower & Masts
I) BS 4592 (1987): Part 2: Specification For Expanded Metal Grating Panels
J) BS 4592 (1977): Code Of Practice For Protective Coating Of Iron And Steel Structure Against Corrosion
K) BS 4190: Bracing & Flanged Bolts
L) BS 4190: Rolled Steel sections, Flats & Plates

If any special requirement, we can design and discuss with client.