Making Machine Surgical N95 Fully Automatic Face Mask Production Line

China Making Machine Surgical N95 Fully Automatic Face Mask Production Line, Find details about China N95 Face Mask Machine, N95 Face Mask Making Machine from Making Machine Surgical N95 Fully Automatic Face Mask Production Line

Model NO.
OYD-N95-AFOM-10
Voltage
AC220V
Powder
4.5kw (Optional)
Compressor
0.6~0.8MPa 6-8kg
Capacity
35PCS/Minute
Weight
1050kg
Qualification Rate
98-99%
Equipment Failure Rate
2%
Trademark
OYADE
Transport Package
Sea and Air Transport
Origin
China
Model NO.
OYD-N95-AFOM-10
Voltage
AC220V
Powder
4.5kw (Optional)
Compressor
0.6~0.8MPa 6-8kg
Capacity
35PCS/Minute
Weight
1050kg
Qualification Rate
98-99%
Equipment Failure Rate
2%
Trademark
OYADE
Transport Package
Sea and Air Transport
Origin
China

Product introduction and principle

This machine is mainly used for N95 automatic forming: After unwinding the whole
roll of material, it is loaded by roller driving. The cloth is automatically loaded, and
the bridge of the nose bridge is pulled and unrolled. The mold is roll-welded to the
edge band, cut and shaped by a rolling knife, and the forming mask is conveyed out
through the back roller. The mask is sealed by manual ultrasonic welding, and the ear
tape is manually welded by an ultrasonic spot welder
Making Machine Surgical N95 Fully Automatic Face Mask Production Line

1)Pre-process: fully automated
Automatic feeding and cutting body machine (automatic feeding, including nose bridge, embossing, cutting)
capacity: 30-50 pcs/minute, 50,000pcs/24hours
Making Machine Surgical N95 Fully Automatic Face Mask Production Line

2)Post process: manual operation

Edge sealing and cutting machine: manual operation 2-4S, 1 set
Ear welding machine: manual operation 4-8S, 1 Set
Capacity: 8-15 pcs/ minute, 17,000pcs/24 hours.

Special note: This is the evaluation reference time, and the test machine capacity is based on the operator's speed.

3)The actual point of the production line is about 60 square meters
The materials needed for production are designed by the buyer. Each semi-automatic line is equipped with 5 workers per shift.

Making Machine Surgical N95 Fully Automatic Face Mask Production Line

Product specification

  1. Model: OYD-N95-AFOM-10
  2. Machine Size: 3825(L)*1365(M)*1900(H)mm
  3. Production capacity: 30-50PCS / min, 50,000pcs/24hours
  4. Voltage: AC220V
  5. Powder: 4.5kw (Optional)
  6. Compressor: 0.6~0.8MPA(6-8kg)
  7. Capacity: 35pcs/minute
  8. Size:7.46m*1.2m*1.9m(Height)
  9. Weight: 1050kg
  10. Equipment production qualification rate: 98-99% (except that the incoming materials do not meet the requirements, except for improper operation by employees)
  11. Equipment failure rate: 2% (refers to the failure caused by the equipment itself)
Making Machine Surgical N95 Fully Automatic Face Mask Production Line



Finished product
Model Numbern95 mask
n95 mask ColorWhite 
Materialnon-woven, soft cotton, melt blown filter
TypeAntibacterial
Functionanti-corona virus / prevent flu / anti smoke / dust

Making Machine Surgical N95 Fully Automatic Face Mask Production Line


 Enviornment requirement
  1. Color:Computer white paint or hard-plated inscription, oxidized color, stainless steel color, according to this standard without special instructions.
  2. Machine Weight: ≤500kg Ground load requirements ≥300kg /
  3. Voltage: AC220V±5%,50HZ,Power 6.5-8.5kw
  4. Enviornment requirement: Temperature:10ºC~35ºC, Humidity: 5-35%HR,no flammable, no corrosive gas, no dust. (cleanliness no less than 100000)
  5. Keep away from paint (gasoline), chemicals, acids, alkalis, and explosive or flammable materials.
  6. Avoid proximate to machines that generate vibration.
  7. Ambient lighting: above 300LUX.
Raw material specification
Making Machine Surgical N95 Fully Automatic Face Mask Production Line

 
 

item

Number of hanging shafts

width
mm
Coil outer diameter
mm barrel inner diameter
Weight


Non woven
Melt blown Fabric
4 260 Φ600Φ76.2Max 15 kg
//
Nose bridge strip
Steel wire covered plastic / pure steel wire / full plastic
1 3-7 Φ400Φ76.2Max 25 kg

Ear loop
2 bags160*3  10 N
Making Machine Surgical N95 Fully Automatic Face Mask Production Line


After sale service system
Making Machine Surgical N95 Fully Automatic Face Mask Production Line


1.Commission and testing
Providing the debugging materials, the installation and commissioning are completed within two days;
2.workers training
Equipment assembly training-Training of equipment personnel for the assembly and maintenance of equipment. Mass production training-traning on handling various issues during mass production
3.After-sales service:
1)The warranty period of the equipment is 6 months,Within five years after the expiration of the warranty period. The seller shall still be responsible for the repair and maintenance of the equipment
2) Online problem solving Respond within 8 hours, and give a solution within 24 hours,resolved within 48 hours
4.Follow-up service Provide services to help customers purchase raw materials and accessories We have been mainly engaged in the sales of machinery since 2008. So for the whole process of the production line from negotiation, contract signing;Production;Inspection, delivery;Installation; after-sale services and so on, we're all familiar with the whole process.

Our Factory
Shandong Ouyade Machinery has developed the efficient and fully automatic mask production line, which can automatically complete multiple loading and unloading and testing processes, including manual loading rolls, automatic feeding, cutting nose line, ultrasonic welding body piece, cutting body piece, material distribution, and ultrasonic welding ear line , Cutting the ear line, automatic cutting, belt line output and other processes.

Making Machine Surgical N95 Fully Automatic Face Mask Production Line
Making Machine Surgical N95 Fully Automatic Face Mask Production Line
Making Machine Surgical N95 Fully Automatic Face Mask Production Line