Products

Supply Hot Rolled 303 Stainless Steel Flat Bar with Mtc

China Supply Hot Rolled 303 Stainless Steel Flat Bar with Mtc, Find details about China 303 Stainless Steel Flat Bar, Stainless Steel Flat Bar from Supply Hot Rolled 303 Stainless Steel Flat Bar with Mtc

Model NO.
303
Width
1000mm to 2200mm
Length
Cut as Requirement
Edge
Mill Edge or Slit Edge
Mtc
En 10204/3.1
Trademark
ZYTC
Transport Package
as Customer′s Requirement
Specification
Thickness 0.3mm to 280mm
Origin
China
HS Code
72192200
Model NO.
303
Width
1000mm to 2200mm
Length
Cut as Requirement
Edge
Mill Edge or Slit Edge
Mtc
En 10204/3.1
Trademark
ZYTC
Transport Package
as Customer′s Requirement
Specification
Thickness 0.3mm to 280mm
Origin
China
HS Code
72192200
1:Brief Introduction Of 303 stainless steel:

Standard Inventory Specifications

  • UNS S30300
  • AMS 5640 Chem Only
  • ASTM A 895
  • SAE AMS 5640

Grade 303 represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines. Machinability Rating (compared to B1212) is approximately 78%.

303 is also available as a "Ugima" Improved Machinability grade, with machinability even higher than that of the standard 303.

The sulphur addition which is responsible for the improved machining and galling characteristics of Grade 303 lowers its corrosion resistance to below that of Grade 304. As for other austenitic grades the structure gives 303 excellent toughness, although the sulphur in 303 reduces its toughness slightly.

Grade 303Se (UNS S30323) has a selenium rather than sulphur addition, improving the hot and cold forming characteristics over those of 303 and providing a smoother machined surface finish. The machinability rate is also slightly reduced. Grade 303Se is not readily available in Australia.

303 and 304 have similar chemistry and both are iron alloys, however Alloy 303 was purposefully developed for ease of machining. The additional sulfur present in 303 assists in breaking up turnings which reduces drag on the cutting tool and increases machining speeds.  AISI 303 is not weldable and has limited formability due to its sulfer content.  AISI 304 is weldable and machinable.  It has very good drawability as well.  Its low yield strength and high elongation allow it to be formed into complex shapes.  

The technical data provided is for information only and not for design purposes. It is not warranted or guaranteed.

2:Stainless Steel Plate Process:
Supply Hot Rolled 303 Stainless Steel Flat Bar with Mtc
3:Stainless Steel Plate Package:
Supply Hot Rolled 303 Stainless Steel Flat Bar with Mtc
4:About us:
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on . 
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners. 
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!
5:Why choose us?
* More than 20 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers

You Might Also Like