The reason that Horizontal slurry pump can not running:

Horizontal slurry pump in use for a period of time will appear some problems, in which the machine is not moving is a relatively common phenomenon, many users feel, difficult to solve, we will introduce the reasons for this for you:

1. The bearing is damaged, causing it to get stuck and tripping as soon as the control cabinet of the water pump is started;

2, the transfer of liquid is corrosive, and the ordinary cast iron horizontal slag slurry pump is easy to be corroded off, impeller nut is loosened after corrosion, resulting in impeller and pump body contact so that the turn is not moving;

3. There is a problem with the rotor of the motor, which makes it difficult for the motor to turn.

The maintenance of slurry pump

1, bearing water pressure, water to meet the provisions, at any time to adjust (or replace) the tightness of the packing, do not cause leakage of shaft seal slurry.And timely replacement of shaft sleeve.

2. When replacing the bearing, the bearing assembly shall be dust-free, the lubricating oil shall be clean, and the bearing temperature during the operation of the slurry pump shall generally not exceed 60-650 ºC, and the high temperature shall not exceed 750ºC

3, to ensure the coaxiality of the motor and slurry pump, to ensure that the elastic pad in the coupling is complete and correct, damaged should be replaced in time.

4. Ensure correct, firm and reliable installation of slurry pump components and pipeline system.

5, part of the slurry pump parts are vulnerable parts, in daily use to pay attention to the wear and tear of vulnerable parts, timely repair or replacement.Slag slurry pump wear parts maintenance or replacement process to ensure correct assembly, reasonable clearance adjustment, avoid tight friction phenomenon.

6. The suction pipeline system of slurry pump shall have no leakage state, and attention shall be paid to whether the suction inlet is blocked during operation.Slag slurry pump needs to deal with the medium with solid particles, so in the pump pool placed in the grille should meet the requirements of the slag slurry pump can pass through the particles, reduce the possibility of too large particles or long fiber material into the pump body causing blockage