Products

Xpon ONU 1ge+1fe+CATV+Dual WiFi for FTTX Network Compatible Huawei Zte Olt

China Xpon ONU 1ge+1fe+CATV+Dual WiFi for FTTX Network Compatible Huawei Zte Olt, Find details about China Xpon ONU, ONU from Xpon ONU 1ge+1fe+CATV+Dual WiFi for FTTX Network Compatible Huawei Zte Olt

Model NO.
UVG-TW-04
CATV
45~1000MHz
CATV RF Output Level
≥70dBuV
Power Supply
Additional Power Adaptor 100-240VAC/50-60Hz Input
Trademark
UVINS
Transport Package
Carton
Specification
CE
Origin
China
Model NO.
UVG-TW-04
CATV
45~1000MHz
CATV RF Output Level
≥70dBuV
Power Supply
Additional Power Adaptor 100-240VAC/50-60Hz Input
Trademark
UVINS
Transport Package
Carton
Specification
CE
Origin
China
Overview
  1. UVG-TW-04 is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services.
    1. UVG-TW-04 is based on mature and stable, cost-effective XPON technology.
    2. UVG-TW-04 adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X

Functional Feature
  1.    
    1. Support EPON/GPON mode and switch mode automatically
    2. Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
    3. Support IPv4 and IPv6 dual mode
    4. Support 2.4G WIFI and Multiple SSID
    5. Support CATV interface for Video Service and remote control by Major OLT
    6. Support LAN IP and DHCP Server configuration
    7. Support Port Mapping and Loop-Detect
    8. Support Firewall function and ACL function
    9. Support IGMP Snooping/Proxy multicast feature
    10. Support TR069 remote configuration and maintenance
    11. Specialized design for system breakdown prevention to maintain stable system

  3. Hardware Specification
    Technical itemDetails
    PON Interface1 GPON BOB (Bosa on Board)
    Receiving sensitivity: ≤-28dBm
    Transmitting optical power: +1~+4dBm
    Transmission distance: 20KM
    WavelengthTX: 1310nm, RX: 1490nm
    Optical InterfaceSC/APC Connector
    Design SchemeRTL9603C+RTL8192FR    BOB(RTL8290B)
    Chip SpecCPU 950MHz,DDR2 128MB
    FlashSPI Nor Flash 16MB
    LAN Interface1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
    WirelessCompliant with IEEE802.11b/g/n,
    Operating frequency: 2.400-2.4835GHz
    support MIMO, rate up to 300Mbps,
    2T2R,2 external antenna 5dBi,
    Support: Multiple SSID
    Channel: Auto
    Modulation type: DSSS, CCK and OFDM
    Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
    CATV InterfaceRF, WDM, optical power : +2~-15dBm
    Optical reflection loss: ≥45dB
    Optical receiving wavelength: 1550±10nm
    RF frequency range: 47~1000MHz,  RF output impedance: 75Ω
    RF output level: 78dBuV
    AGC range: -13~+1dBm
    MER: ≥32dB@-15dBm
    LED9 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN2, Worn, Normal(CATV)
    Push-Button3,For Function of Reset, WLAN, WPS
    Operating ConditionTemperature: 0ºC~+50ºC
    Humidity: 10%~90%(non-condensing)
    Storing ConditionTemperature: -30ºC~+60ºC
    Humidity: 10%~90%(non-condensing)
    Power SupplyDC 12V/1A
    Power Consumption≤6W
    Dimension155mm×92mm×34mm(L×W×H)
    Net Weight0.24Kg

    Panel lights Introduction
    Pilot  LampStatusDescription
    WIFIOnThe WIFI interface is up.
    BlinkThe WIFI interface is sending or/and receiving data (ACT).
    OffThe WIFI interface is down.
    WPSBlinkThe WIFI interface is securely establishing a connection.
    OffThe WIFI interface does not establish a secure connection.
    PWROnThe device is powered up.
    OffThe device is powered down.
    LOSBlinkThe device doses not receive optical signals or with low signals.
    OffThe device has received optical signal.
    PONOnThe device has registered to the PON system.
    BlinkThe device is registering the PON system.
    OffThe device registration is incorrect.
    LAN1~LAN2OnPort (LANx) is connected properly (LINK).
    BlinkPort (LANx) is sending or/and receiving data (ACT).
    OffPort (LANx) connection exception or not connected.
    Worn
    (CATV)    		OnInput optical power is higher than 3dbm or lower than -15dbm
    OffInput optical power is between -15dbm and 3dbm
    Normal
    (CATV)    		OnInput optical power is between -15dbm and 3dbm
    OffInput optical power is higher than 3dbm or lower than -15dbm

You Might Also Like