Programmable Salt Fog Spray Tester Cyclic Corrosion Test Apparatus Chamber

China Programmable Salt Fog Spray Tester Cyclic Corrosion Test Apparatus Chamber, Find details about China Salt Spray Chamber, Spray Corrosion Chamber from Programmable Salt Fog Spray Tester Cyclic Corrosion Test Apparatus Chamber

Basic Info.

Model NO.

B-SST-120

Hydraulic Pressure

50-400kpa

Trademark

BOTO

Transport Package

Strong Wooden Case

Specification

178*120*149 CM

Origin

China

HS Code

85141090

Model NO.

B-SST-120

Hydraulic Pressure

50-400kpa

Trademark

BOTO

Transport Package

Strong Wooden Case

Specification

178*120*149 CM

Origin

China

HS Code

85141090

Product Desciption

Programmable Salt Fog Spray Tester Cyclic Corrosion Test Apparatus Chamber

Introduction:
Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.

Salt Spray Tester is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.

Specifications:

Model	BT-60	BT-90	BT-120	BT-160	BT-200
Inner size (cm)	60x45x40	90x60x50	120x100x50	160x100x50	200x100x50
External size(cm)	107x60x118	141x88x128	190x130x140	230x130x140	270x130x140
Inside temp	Brine test method(NSS ACSS)35°C±1°C/Corrosion resistance test method (CASS)50°C±1°C
Brine temp	35°C±1°C 50°C±1°C
Test chamber volume	108L	270L	600L	800L	1000L
Brine chamber volume	15L	25L	40L	40L	40L
Compressed air pressure	1.00±0.01kgf/cm2
Spray volume	1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average)
Test room relative humidity	85%RH or more
PH	6.5~7.2 3.0~3.2
Spray method	Programmable spray (including the continuous spray interrupted spray)
Power	AC220V1Φ10A	AC220V1Φ15A	AC220V1Φ20A	AC220V1Φ20A	AC220V1Φ30A

Corresponding Standard:
GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM D1735
IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA - 364-31C
EIA - 364-59 ASTM B117
Programmable Salt Fog Spray Tester Cyclic Corrosion Test Apparatus Chamber

Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.

Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

Packaging Dimensions: (WxDxH) 1610*1050*1400mm
Power supply source: single-phase, 220V±10%, 50Hz (can be appointed)
Gross Weight: 150kg
HS Code: 8479899990
Programmable Salt Fog Spray Tester Cyclic Corrosion Test Apparatus Chamber