Blow Molding Machine; Blow Moulding Machine; Plastic Blowing Machine
China Blow Molding Machine; Blow Moulding Machine; Plastic Blowing Machine, Find details about China Blowing Machine, Extrusion Blowing Machine from Blow Molding Machine; Blow Moulding Machine; Plastic Blowing Machine
Basic Info.
Model NO.
BM
Suitable Material
PE,PP, HDPE, LDPE
Oil Pump
Hitech
Hydraulic Valve
Northman
Contactor
Schneider
Proximity Switch
Riko
Touch Screen
Hitech
Microcomputer Control System
Mitsubishi
PLC
Mitsubishi
Air Valve
Airtac
Machine Name
Blow Molding Machine; Blow Moulding Machine; Plast
Trademark
BORUN
Transport Package
Plastic
Specification
500ml-200L
Origin
China
HS Code
84774010
Model NO.
BM
Suitable Material
PE,PP, HDPE, LDPE
Oil Pump
Hitech
Hydraulic Valve
Northman
Contactor
Schneider
Proximity Switch
Riko
Touch Screen
Hitech
Microcomputer Control System
Mitsubishi
PLC
Mitsubishi
Air Valve
Airtac
Machine Name
Blow Molding Machine; Blow Moulding Machine; Plast
Trademark
BORUN
Transport Package
Plastic
Specification
500ml-200L
Origin
China
HS Code
84774010
Product Desciption
Blow Molding Machine; Blow Moulding Machine; Plastic Blowing Machine
This model adopts fixed mould open-closing system and accumulator die.This model is automatic process with low noise, saving energy, high efficiency, safe operation, easy maintenance and other benefits. This model is widely used to produce chemical barrel, auto parts(water box, oil box, air-condition pipe, aoto tail), toys (wheel, hollow autobike, basketball stands, baby castle), tool box, vacuum cleaner pipe, chairs for bus and gymnasium,etc.This model can produce max 10L hollow plastic product.
Characteristic:
1.Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2.Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3.Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4.Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5.Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6..Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
hydraulic parts
electronic parts
air control system
Characteristic:
1.Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2.Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3.Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4.Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5.Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6..Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
| Model | Unit | BM-50S | BM-60S | BM-80S | BM-60D | BM-70D |
| Max. Product volume | L | 2.5 | 6 | 25 | 2 | 6 |
| Dry clcle | Pcs/h | 1500 | 1200 | 600 | 700x2 | 600x2 |
| Screw diameter | Mm | 50 | 60 | 80 | 60 | 70 |
| Screw L/D ratio | L/D | 24-30 | 24-30 | 25-30 | 24-30 | 24-30 |
| Screw drive power | KW | 11-15 | 15-18.5 | 37-45 | 15-18.5 | 18.5-30 |
| Screw heating capacity | KW | 7.8-8.5 | 10.8-12 | 16-20 | 10.8-12 | 12-14.5 |
| Output of HDPE | Kg/h | 30-35 | 60-68 | 120-140 | 60-68 | 70-85 |
| Oil pump drive power | KW | 5.5 | 5.5 | 22 | 5.5 | 5.5-7.5 |
| Clamping force | KN | 35 | 68 | 200 | 35 | 68 |
| Platen distance | mm | 138-368 | 178-538 | 400-900 | 138-368 | 178-538 |
| Capacity | L | 4.8 | ||||
| Max. Die diameter | Mm | 90 | 150 | 300 | 90 | 150 |
| Central distance of bi-die | Mm | 110-130 | 130-200 | 130-150 | 150-200 | |
| Max. Die diameter (Bi-die) | mm | 55 | 100 | 80 | 100 | |
| Central distance of three-die | Mm | 80-110 | 100-120 | 80-110 | 110-140 | |
| Max. Die diameter(three-die) | Mm | 40 | 60 | 40 | 70 | |
| Central distance of four-die | Mm | 60-85 | 60-85 | 60-85 | 70-100 | |
| Max. Die diameter (four-die) | Mm | 25 | 30 | 25 | 45 | |
| Die heat capacity | KW | 16 | ||||
| The average consumption | KW/H | 12.5 | 16.5 | 32 | 16.5 | 18.5 |
| Blowing pressure | MPa | 0.6 | 0.6 | 0.8 | 0.6 | 0.6 |
| Air volume | M³/min | 0.4 | 0.5 | 0.8 | 0.4 | 0.4 |
| Cooling water pressure | MPa | 0.2-0.3 | 0.2-0.3 | 0.3 | 0.3 | 0.3 |
| Water consumption | L/MIN | 30 | 50 | 80 | 60 | 70 |
| Dimension | L*W*H | 2.8*1.8*2.3m | 3.0*1.9*2.5m | 4.3*2.2*3.6m | 3.0*2.15*2.6m | 3.5*2.1*2.6m |
| Weight | Ton | 3 | 4.5 | 12.5 | 6.5 | 7.8 |
hydraulic parts
| COMPONENT | SUPPLIERS |
| OIL PUMP | TAIWAN HITECH |
| HYDRAULIC VALVE | TAIWAN NORTHMAN |
| COMPONENT | SUPPLIERS |
| MICROCOMPUTER CONTROL SYSTEM | JAPAN MITSUBISHI PLC |
| TOUCH SCREEN | TAIWAN HITECH TOUCH SCREEN (COLORFUL, BILINGUAL) |
| TEMPERATURE MODULE | TAIWAN 7118R |
| PROXIMITY SWITCH | TAIWAN RIKO |
| CONTACTOR | FRANCE SCHNEIDER |
| MOTOR | SIEMENS BEIDE THREE PHASE MOTOR |
| POWER RESOURCE | TAIWAN MEAN WELL |
| TANSDUCER | TAIWAN DELTA |
| COMPONENT | SUPPLIERS |
| AIR VALVE | TAIWAN AIRTAC |
Contact Us:
Mr. Xavier Guo
Tel: +86-512-58682331
Fax: +86-512-58682331
Mobile: +86-13405609100
borunmachinery.en.made-in-china.com
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine