100Mbps VDSL2 Phoneline Ethernet Adapter Network Extender Ethernet Bridge

China 100Mbps VDSL2 Phoneline Ethernet Adapter Network Extender Ethernet Bridge, Find details about China Phoneline Adapter, Phoneline Ethernet Bridge from 100Mbps VDSL2 Phoneline Ethernet Adapter Network Extender Ethernet Bridge

Model NO.
WD-VD102-G
Trademark
WonderTek
Specification
100Mbps
Origin
China
HS Code
8517699000
Model NO.
WD-VD102-G
Trademark
WonderTek
Specification
100Mbps
Origin
China
HS Code
8517699000
Specifications

Model: WD-VD102-G
Interface: 2* 10/100/1000Base-TX self adaption RJ45,1*RJ11
LED display light: Ethernet, DSL, Power,CO, CPE
Transfer band: 300K-30MHz
Protocol(PHY): IEEE802.3,IEEE802.3x, IEEE802.3u 
Security: 128-AES
Transfer rate(PHY): 100Mbps
Modulation: OFDM
Manageability
Remote Firmware update,support TR-069(optional)
802.1D Ethernet Bridge  802.1Q VLAN
Quality of Service(QoS)
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Working voltage
AC 90V-520V
18-75VDC
100V-700VDC
Operating temperature: -40ºC-80ºC
Size: 120*89*44 (mm)(L×W×H)
Weight: 0.35kg 0.30kg
Range:3000 Meters
Operating environment
Operating humidity:10%-85% (no condense)
Storage humidity: 5%-90%(no condense)
Certification FCC,CE class B,WEEE,RoHS

Features
Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
Transfer range up to 3000 meters

Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.

Immunity of electrical fast transient impulse group(Common mode)

The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.

Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

Anti- vibration 
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.