High Performance Argon Purifier for Optical Emission Spectrometer
China High Performance Argon Purifier for Optical Emission Spectrometer, Find details about China Argon Purifier, Jiebo Argon Purifier from High Performance Argon Purifier for Optical Emission Spectrometer
Basic Info.
Model NO.
JB-4C
Condition
New
Certification
ISO
Trademark
JIEBO
Transport Package
Suitable Package for Shipment
Specification
GB/ISO
Origin
China(Mianland)
Model NO.
JB-4C
Condition
New
Certification
ISO
Trademark
JIEBO
Transport Package
Suitable Package for Shipment
Specification
GB/ISO
Origin
China(Mianland)
Product Desciption
Introduction
The argon gas purifier, Model JB-4C can purify the ordinary pure argon to be high-purity argon gas, Argon gas purifiers are widely used in electronics,metallurgy, machinery, chemical, atomic energy and other economic sectors, for spectral analysis and scientific research to provide high-purity argon gas.
The Operating Principle
The feed argon enters the reactor C01 through the inlet valve AVF01.The impurities in argon, for example O2, react with the catalyst and turn into things that can be absorbed by the C01 .And then enter the absorber C02 through the working change-over valve SVF01 ,The impurities( H2O,CO2,etc) are also absorbed. The purified argon is delivered to using device through the regenerating change-over valve SVF02 and the outlet valve AVF02. After a work period, the absorber will become saturated with the impurities and will no longer operate effectively. The absorber should be chosen to purified argon and the absorber must be regenerated as follows. Firstly the working change-over valve AVF01 will be turn to the position of the absorber . The argon will be purified by the absorber via the working and regenerating change-over valve ( along the dotted line ), outlet valve etc. In order to regenerate the absorber , regenerating gas outlet valve QVF01 will be opened. The argon, which has been purified by absorber , purges the adsorbed reversibly via regulating valve of regenerating gas TVF01, the flow meter FI02,the regenerating change over valve SVF02 ( along the dotted line ) and regenerating gas outlet valve QVF01. At the same time the absorber will be heated about 400ºC, then the impurities absorbed in it will been purged out. The regenerating process will keep on 8 hours. It must cool down to ambient temperature before using the absorber again. The absorbers are operated in turn as stated above. The argon will be purified continuously.
Parameters
Conditions of the feed argon
The argon gas purifier can use this argon gas , purity ≥ 99.9%, For example: the pure argon in bottle and the liquid argon.
Impurities in feed argon: O2 ≤ 1000ppm;
Dew point ≤ -20ºC
Parameters of the outlet gas
Purity ≥ 99.999%,
Impurities in the high-pure argon:
O2 ≤ 1 ppm
Dew point ≤ -70ºC
CO+CO2 ≤0.1PPm
Sulfur compounds ≤0.01PPm
Particles ≤0.3µm
Parameters of the Machine
Operating pressure: ≤ 0.8MPa.
Maximum flow rate: ≤ 60L/min.
Work temperature of the reactor: 300±20ºC
Work temperature of the absorber: ambient temperature
Regenerating temperature of the absorber: 400±20ºC
Flow rate of regenerating argon: about 500 ml/min.
Regenerating period: purify about 100 Nm3 argon gas, cylinders It will depend on the impurities in feed argon, the more impurities the shorter period.
Electrical supply: 220V; 1600W; 50Hz.
Weight: 150 kg approx.
Dimensions 420×600×1230 and (W×D×H)
Feature
High catalytic activity, the gases is high purity after purification.
Dual structure, one set is working, another is for renewable spare. So it can supply long-term continuous gas.
By using pure gas purging of the regeneration process of native renewable hydrogen , so do not need special room and good safety
Regeneration has automatic function, simple operation and less error-prone, performance more stable and reliable.
System adopts zero leaking bellows valve instead of electromagnetic valve with larger failure and leakage,the reliability of the equipment is higher.
Equipment comes with buffer tank, the output gas purity, pressure is more stable and more suitable for the spectrometer.
The argon gas purifier, Model JB-4C can purify the ordinary pure argon to be high-purity argon gas, Argon gas purifiers are widely used in electronics,metallurgy, machinery, chemical, atomic energy and other economic sectors, for spectral analysis and scientific research to provide high-purity argon gas.
The Operating Principle
The feed argon enters the reactor C01 through the inlet valve AVF01.The impurities in argon, for example O2, react with the catalyst and turn into things that can be absorbed by the C01 .And then enter the absorber C02 through the working change-over valve SVF01 ,The impurities( H2O,CO2,etc) are also absorbed. The purified argon is delivered to using device through the regenerating change-over valve SVF02 and the outlet valve AVF02. After a work period, the absorber will become saturated with the impurities and will no longer operate effectively. The absorber should be chosen to purified argon and the absorber must be regenerated as follows. Firstly the working change-over valve AVF01 will be turn to the position of the absorber . The argon will be purified by the absorber via the working and regenerating change-over valve ( along the dotted line ), outlet valve etc. In order to regenerate the absorber , regenerating gas outlet valve QVF01 will be opened. The argon, which has been purified by absorber , purges the adsorbed reversibly via regulating valve of regenerating gas TVF01, the flow meter FI02,the regenerating change over valve SVF02 ( along the dotted line ) and regenerating gas outlet valve QVF01. At the same time the absorber will be heated about 400ºC, then the impurities absorbed in it will been purged out. The regenerating process will keep on 8 hours. It must cool down to ambient temperature before using the absorber again. The absorbers are operated in turn as stated above. The argon will be purified continuously.
Parameters
Conditions of the feed argon
The argon gas purifier can use this argon gas , purity ≥ 99.9%, For example: the pure argon in bottle and the liquid argon.
Impurities in feed argon: O2 ≤ 1000ppm;
Dew point ≤ -20ºC
Parameters of the outlet gas
Purity ≥ 99.999%,
Impurities in the high-pure argon:
O2 ≤ 1 ppm
Dew point ≤ -70ºC
CO+CO2 ≤0.1PPm
Sulfur compounds ≤0.01PPm
Particles ≤0.3µm
Parameters of the Machine
Operating pressure: ≤ 0.8MPa.
Maximum flow rate: ≤ 60L/min.
Work temperature of the reactor: 300±20ºC
Work temperature of the absorber: ambient temperature
Regenerating temperature of the absorber: 400±20ºC
Flow rate of regenerating argon: about 500 ml/min.
Regenerating period: purify about 100 Nm3 argon gas, cylinders It will depend on the impurities in feed argon, the more impurities the shorter period.
Electrical supply: 220V; 1600W; 50Hz.
Weight: 150 kg approx.
Dimensions 420×600×1230 and (W×D×H)
Feature
High catalytic activity, the gases is high purity after purification.
Dual structure, one set is working, another is for renewable spare. So it can supply long-term continuous gas.
By using pure gas purging of the regeneration process of native renewable hydrogen , so do not need special room and good safety
Regeneration has automatic function, simple operation and less error-prone, performance more stable and reliable.
System adopts zero leaking bellows valve instead of electromagnetic valve with larger failure and leakage,the reliability of the equipment is higher.
Equipment comes with buffer tank, the output gas purity, pressure is more stable and more suitable for the spectrometer.
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier